624060

Fluke networks DTX CableAnalyzer Series Manual

54
Zoom out
Zoom in
Previous page
1/398
Next page
DTX Series CableAnalyzer
Technical Reference Handbook
1-28
Adjusting the Display Contrast
1
Press and hold G.
2
Use B C for coarse adjustments and K RFine
L FineS for fine adjustments.
3
J Default Setting sets the contrast to the default
level.
4
Press H when you are done.
The setting is retained when you turn the tester off. The
contrast setting does not affect the battery life.
Setting the Power Down Timer
The power down timer turns off the tester after a selected
period of inactivity. The timer starts when the backlight
timer times out. If the backlight timer is disabled, the power
down timer starts whenever the tester is not being used.
The smart remote turns off after 60 minutes of inactivity.
This setting is not adjustable.
Note
The power down timer is inactive when the ac
adapter is connected or when the USB or RS-232
serial port is active.
To set the power down timer:
1
Turn the rotary switch to SETUP, use D to
highlight Instrument Settings; then press H.
2
Press C to go to the tab with the Power Down Time-
Out setting; then press
H.
3
Use D to highlight the setting you want; then
press H.
Setting the Backlight Timer
The backlight timer turns off the backlight after a selected
period of inactivity. Using the timer to turn off the
backlight helps conserve battery power.
To set the backlight timer:
1
Turn the rotary switch to SETUP, use D to
highlight Instrument Settings; then press
H.
2
Press C to go to the tab with the Backlight Time-Out
setting. Use
D to highlight Backlight Time-Out;
then press H.
3
Use D to highlight the setting you want; then
press H.
… 54 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fluke networks DTX CableAnalyzer Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fluke networks DTX CableAnalyzer Series in the language / languages: English as an attachment in your email.

The manual is 10,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info