624060

Fluke networks DTX CableAnalyzer Series Manual

44
Zoom out
Zoom in
Previous page
1/398
Next page
DTX Series CableAnalyzer
Technical Reference Handbook
1-18
Checking the Battery Status
The battery status icon ( ) near the upper-right corner of
the tester’s main screens shows the battery’s charge level.
The smart remote’s LEDs show the smart remote’s battery
status at the end of the power-up cycle, as shown in Figure
1-5.
To see more information about battery status:
1
Connect the tester and smart remote as shown in
Figure 1-6. You may also connect the testers through a
link.
2
If you connected the testers through twisted pair
adapters:
On the main Autotest screen, verify that the test type is
set to Twisted Pair. Press
J Change Media to change
it if necessary.
If you connected the testers through fiber modules:
On the main Autotest screen, verify that the test type is
set to Fiber Loss. Press
J Change Media to change it
if necessary.
3
Turn the rotary switch to SPECIAL FUNCTIONS.
4
Use D to highlight Battery Status; then press
H.
The Time Remaining value tells you approximately how
long the main tester’s battery will last based on the last
3 minutes of use.
The accuracy of the battery gauge may drift over time. If
the battery status information seems incorrect, retrain the
battery gauge as described in Chapter 14.
amd167.eps
Figure 1-5. Remote Battery Status
Shown After Power-up
84 % - 100 %
67 % - 83 %
51 % - 66 %
34 % - 50 %
18 % - 33 %
0 % - 17 %
… 44 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fluke networks DTX CableAnalyzer Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fluke networks DTX CableAnalyzer Series in the language / languages: English as an attachment in your email.

The manual is 10,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info