624060

Fluke networks DTX CableAnalyzer Series Manual

35
Zoom out
Zoom in
Previous page
1/398
Next page
Getting Acquainted
Safety Information
1-9
1
•
Do not use the tester if it operates abnormally.
Protection may be impaired.
WCaution
To avoid disrupting network operation, to avoid
damaging the tester or cables under test, to avoid
data loss, and to ensure maximum accuracy of test
results:
•
Never connect the tester to an active network.
Doing so may disrupt network operation.
•
Never attempt to insert any connector other than
an 8-pin modular (RJ45) connector into an
adapter’s jack. Inserting other connectors, such as
RJ11 (telephone) connectors, can permanently
damage the jack.
•
Never operate portable transmitting devices, such
as walkie-talkies and cell phones, during a cable
test. Doing so might cause erroneous test results.
•
To ensure maximum accuracy of copper cable test
results, perform the reference procedure every
thirty days as described under “Setting the
Reference” in Chapters
3 and 5.
•
The permanent link interface adapters may not
perform properly or may be damaged if they are
handled improperly. See page
1-20 for important
handling information.
•
Turn off the tester before attaching or removing
modules.
•
Leave the module bay covers in place when
modules are not installed. See page
1-12.
•
Never remove the memory card while the
memory card’s LED is on. Doing so can corrupt the
data on the card.
•
Memory cards may be lost, damaged, or
accidentally formatted, resulting in data loss.
Therefore, Fluke Networks recommends saving no
more than one day’s worth of test results on a
memory card.
WWarning: Class 1 and Class
2 Laser Products
*
To avoid possible eye damage caused by
hazardous radiation, when using a DTX-MFM2/
SFM2/GFM2 or DTX Compact OTDR module
follow the safety guidelines given in Chapter 7
and Chapter 8 of this manual.
… 35 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fluke networks DTX CableAnalyzer Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fluke networks DTX CableAnalyzer Series in the language / languages: English as an attachment in your email.

The manual is 10,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info