Manual Fluke networks DSX 5000 (page 31 of 90) (English)

624053

Zoom out

Zoom in

1/90

Chapter 1: Get Acquainted

Options for Cable IDs

 You can use the CABLE ID SETUP screen to make a set of

sequential IDs. The tester uses the IDs in sequence as the

names for the results you save. When Auto Save is on, the

tester automatically saves each result with the next available

ID in the set. See Chapter 8.

A cable ID set also lets you use IDs again so you can add

different results to tests you saved before.

 You can enter an ID each time you do a test. To do this, turn

off the Auto Save function (see page 23). Each time a test is

completed, tap SAVE (if the test passed) or FIX LATER (if the

test failed), then enter an ID manually.

 You can use LinkWare software to make a set of IDs,

download the set to the tester, then import it into a project.

 After you do a test, you can enter the ID for a test you saved

before. This lets you replace results or add different results to

a test you saved before.

 If the test failed before, and you saved the results, you can

select it on the RESULTS screen, then press TEST AGAIN to

replace the results for that ID.

Notes

Cable IDs are case-sensitive. For example, the

tester saves result with the names “A0” and “a0”

in two different records.

A cable ID can have a maximum of 60 characters.

If you delete all the ID sets in a project, the tester

makes a default set that starts with 001.

To turn the Auto Save function on or off

1 On the home screen, tap the Next ID panel.

2 On the CHANGE ID screen, tap the On/Off control next to

Auto Save.

3 Tap DONE.

riešenia na presné meranie

http://www.elso.sk

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fluke networks DSX 5000 in the language / languages: English as an attachment in your email.

The manual is 7 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Fluke networks DSX 5000

Fluke networks DSX 5000 Quick start guide - English - 10 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fluke networks DSX 5000 Manual

Product: