775824
74
Zoom out
Zoom in
Previous page
1/92
Next page
CableIQ Qualification Tester
Users Manual
64
To update the tester’s software:
1 If you want to save any of the Autotests stored in the
tester, use CableIQ Reporter software to upload them
to a PC.
2 Download the latest versions of CableIQ Reporter
software and the CableIQ update file from the Fluke
Networks website, or contact Fluke Networks to get
the files by other means. The files are available at
www.flukenetworks.com/support. Save the files to
your hard drive.
3 Install the latest version of CableIQ Reporter on your
PC.
4 Turn on the tester and connect it to the PC using the
USB cable provided.
5 On the CableIQ Reporter menu bar, select Utilities >
Update CableIQ Software , locate and select the
CableIQ update file (.ref extension); then click OK.
6 To verify the update, turn the rotary switch to SETUP;
then select Version Information.
If the software update fails, repeat steps 4 through 6. If it
fails again, contact Fluke Networks for assistance.
Replacing the Batteries
Replace the 4 AA batteries when the message Low
Batteries! appears.
Note
Install new batteries within 3 minutes of
removing the old batteries. If you leave the
batteries out for more than 3 minutes, the time
and date may need to be reset.
The tester’s battery gauge is most accurate when
alkaline batteries are installed.
Figure 26 shows how to replace the batteries.
74


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fluke networks CableIQ at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fluke networks CableIQ in the language / languages: English as an attachment in your email.

The manual is 1.07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info