775824
62
Zoom out
Zoom in
Previous page
1/92
Next page
CableIQ Qualification Tester
Users Manual
52
Testing for Continuity
The continuity function lets you test for opens and shorts
on the 8-pin modular jack or the coaxial connector. The
tester shows a bar graph of resistance from 500 to
5000 , and the tester’s audible tones vary depending on
the resistance measured.
On an 8-pin jack, the tester checks for continuity
between the wires in the pair you select. Pair 12 is the
default.
To check continuity:
1 Verify that the circuit to be tested is not powered or
in service. For cabling, use DISCOVER mode to check
for active services. For other types of circuits or
components, use a voltage meter to check for
power.
2 Turn the rotary switch to DIAG.
3 Use D to highlight Continuity; then press H,
J, or P.
4 To check continuity using the coaxial connector,
press K c.
5 Connect the tester to the circuit, component, or
cabling to be tested. Figure 23 shows connections
using the optional 8-clip test lead.
62


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fluke networks CableIQ at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fluke networks CableIQ in the language / languages: English as an attachment in your email.

The manual is 1.07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info