775824
58
Zoom out
Zoom in
Previous page
1/92
Next page
CableIQ Qualification Tester
Users Manual
48
Using the Toner
You can use the tester with an optional tone probe to
locate cables in bundles, at patch panels, or behind walls.
Use the tester’s IntelliTone functions with a Fluke
Networks IP100 or IP200 tone probe. The digital
IntelliTone signal is easier to detect at a distance than
analog tones, and its frequency and encoding eliminate
cable misidentification due to signal bleed and radiated
or ambient noise.
The tester’s other tones, which are analog, can be
detected by most tone probes.
To use the toner:
1 Connect the tester to twisted pair or coaxial cabling
as shown in Figure 20.
2 Turn the rotary switch to TONE.
3 Use DA to highlight a tone:
IntelliTone: One-note and two-note IntelliTone
signals for use with a Fluke Networks IP100 or IP200
probe.
Tone 1, Tone 2, Tone 3, Tone 4: Multi-note, analog
tones detectable by most tone probes.
For tones 1 through 4, press J X to hear the
tones.
4 To tone coaxial cable, press K c.
5 Use the probe to search for the cable.
For details on using the IntelliTone function, see the
tone probe’s documentation.
The toner also turns on when you start an Autotest with
no adapter or ID locator connected.
58


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fluke networks CableIQ at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fluke networks CableIQ in the language / languages: English as an attachment in your email.

The manual is 1.07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info