775824
41
Zoom out
Zoom in
Previous page
1/92
Next page
Qualifying Cabling with the Autotest
31
avv27.bmp avv33.bmp
Bridge tap detected at about 86 m.
The distance to a bridge tap is approximate () because
multiple reflections from the bridge tap interfere with
length measurements.
Note
Bridge tap detection requires a minimum of two
branches (excluding the branch connected to the
tester) at least 15 ft (4.6 m) long each, with a
combined length of at least 40 ft (12.2 m).
Delay skew failure (1000BASE-T only). Delay skew results are
available only if delay skew failed.
Delay skew is the difference in the arrival times of signals on
the cable pairs. See the Appendix for causes of delay skew
problems.
Note
If both the length test and skew test failed, only
the length results are shown.
Figure 12. Length Results Screens (cont.)
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fluke networks CableIQ at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fluke networks CableIQ in the language / languages: English as an attachment in your email.

The manual is 1.07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info