775832
98
Zoom out
Zoom in
Previous page
1/98
Next page
190 Series III
Users Manual
92
Troubleshooting
Test Tool Shuts Down After a Short Time
The batteries may be empty. Check the battery symbol at the top right of the screen. h
indicates that the batteries are empty and must be charged. Connect the BC190 power
adapter.
The test tool is still on but the Display Auto Off timer is active. To turn the display on press any
key (restarts the Display AUTO-off timer), or connect the BC190 power adapter.
The power down timer is active.
Press ON/OFF to turn on the test tool.
•See Power Down Timer.
Screen Remains Black
Make sure that the test tool is on (press O and wait several seconds).
The display Auto Off Timer is active. To turn on the display press any key (restarts the Display
AUTO-off Timer), or connect the BC190 power adapter.
•See Display AUTO-off Timer.
Test Tool Cannot Be Turned Off
If the test tool cannot be turned off due to a software hangup, push the ON/OFF key for at least
5 seconds.
FlukeView 2 Does Not Recognize the Test Tool
Make sure that the test tool is turned on.
Make sure that the interface cable is properly connected between the test tool and the PC or
the WiFi connection is set up correctly. Use only the test tool mini USB port for
communication with a computer.
Make sure that no SAVE/RECALL/COPY/MOVE action from or to a USB-stick is being
performed.
Make sure that the USB drivers have been correctly installed. USB Drivers.
Battery Operated Fluke Accessories Do Not Function
When using battery operated Fluke accessories, always first check the battery condition of the
accessory with a Fluke multimeter or follow the procedure given for that particular accessory.
98


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fluke MDA-550-III at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fluke MDA-550-III in the language / languages: English as an attachment in your email.

The manual is 9.23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info