Manual Fluke DSP-100 (page 183 of 190) (English)

624055

183

Zoom out

Zoom in

1/190

Tests Run per Test Standard During an Autotest

C-5

Table C-1. Tests Run per Test Standard During an Autotest (continued)

Test Standard

Attenuation ACR Return Loss

Prop.

Delay

Skew

Coax Cables

IEEE 10BaseT ■ 5-10 MHz

100BaseTX ■ 16 MHz ■ 1-80 MHz

100BaseT4 ■ 2-12.5 MHz ■■

IEEE 802.12 4-UTP ■ 1-15 MHz ■■

IEEE 802.12 STP ■ 1-100 MHz ■ 1-100 MHz ■

TokenRing, 4 Mb/s ■ 4 MHz ■ 1-12 MHz

TokenRing,16 Mb/s, Passive ■ 16 MHz ■ 1-25 MHz

TokenRing,16 Mb/s, Active ■ 16 MHz ■ 1-25 MHz

TP-PMD ■ 16 MHz ■ 1-80 MHz

Twin-Ax: RJ45 pins 4, 5, S

ARCnet

Aus/NZ Class C Channel ■ 1-16 MHz ❒

Aus/NZ Class D Channel ■ 1-100 MHz ■ 1-100 MHz ❒

Aus/NZ Class C Basic Link ■ 1-16 MHz ❒

Aus/NZ Class D Basic Link ■ 1-100 MHz ■ 1-100 MHz ❒

All Tests ■ 1-100 MHz ■ 1-100 MHz ■ 1-100 MHz ❒❒

■

❒

Test standards version 4.0.

Resistance, propagation delay, and delay skew are always measured; results appear on printed test

reports.

Pass/Fail result given.

Pass/Warning result given.

Results within the accuracy specifications of the test tool are marked with an asterisk.

NEXT test is run but not displayed. Results are used to calculate ACR.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fluke DSP-100 in the language / languages: English as an attachment in your email.

The manual is 1,66 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fluke DSP-100 Manual

Product: