763943
15
Zoom out
Zoom in
Previous page
1/134
Next page
Reference Multimeter and 8 ½ Digit Multimeter
Front and Rear Panel
11
Table 3. Front-Panel Features (cont.)
Number Name Function
G
Function Keys: These keys select one of the major functions for the Product. Push
any one of the function keys to take you immediately out of any
other display screen and into the top level of that function.
Access the DCV (DC Voltage) function. See DC Voltage.
Access the ACV (AC Voltage) function. See AC Voltage.
Access the DCI (DC Current) function. See DC Current.
Access the ACI (AC Current) function. See AC Current.
Access the Ohms function. See Resistance.
Access the Digitize function. See Digitize.
When pushed, makes other functions visible that can be selected in
the Product: Capacitance (8588A only), RF Power (8588A only),
Frequency Counter, DCI Ext Shunt (8588A only), ACI Ext Shunt
(8588A only), PRT readout, and Thermocouple readout. This key is
used in conjunction with (More) and cycles through the
available functions. When one of the functions is selected under
More, illuminates. See More.
H
Provides mathematical operations on measurements, for example,
averaging, multiplication by M, subtraction of C, and division by Z.
The Math annunciator on the display indicates that a Mathematical
operation is active. The Last Reading softkey () is useful to
quickly set C, Z, or m. See Math.
I
When selected, allows configuration of the front and rear terminals,
including front/rear ratio measurement, and shows their status.
Provides control of the External GUARD terminal and the rear TRIG
OUT BNC connector. Shows the softkeys that configure the front
and rear terminals, External Guard, and rear TRIG OUT BNC
connector. (Terminals) gives selections for Front, Rear, and
shows three scan modes with different mathematical combinations
of the front and rear readings, and also an Isolated configuration.
(Front Delay) sets the delay before the front terminals are
activated. (Rear Delay) selects the delay before the rear
terminals are activated. (External Guard) activates the
GUARD terminal (On or OFF). and (Output Signal) is used
to set the behavior of the rear TRIG OUT BNC connector. See Input
Terminal Selection and TRIG OUT.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fluke 8588A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fluke 8588A in the language / languages: English as an attachment in your email.

The manual is 1,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Fluke 8588A

Fluke 8588A User Manual - German - 134 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info