764225
14
Zoom out
Zoom in
Previous page
1/22
Next page
Model 77 Series IV
Users Manual
10
Measuring AC or DC Current
XWWarning
To avoid personal injury or damage to the Meter:
Never attempt to make an in-circuit current measure-
ment when the open-circuit potential to earth ground
is >1000 V.
Check the Meter's fuses before testing. (See “Testing
the Fuses”.)
Use the proper terminals, switch position, and range
for your measurement.
Never place the probes in parallel with a circuit or
component when the leads are plugged into the
current terminals.
Turn power OFF, break circuit, insert Meter in series, turn power
on.
CAT
CAT
+
+
RANGEHOLD
MIN MAX
mA
A
DC
AIK08F.EPS
Measuring Frequency
XWWarning
To avoid electrical shock, disregard the bar graph for
frequencies >1 kHz. If the frequency of the measured
signal is >1 kHz, the bar graph is unspecified.
The Meter measures the frequency of a signal. The trigger level is
0 V ac for all ranges.
+
RANGEHOLD
MIN MAX
Hz
V
AC Voltage Frequency
EOM09F.EPS
To exit frequency, press yellow button or turn the rotary switch.
In frequency, the bar graph shows the ac voltage accurately up
to 1 kHz.
Select progressively lower ranges using manual ranging for a
stable reading.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fluke 77 Series IV at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fluke 77 Series IV in the language / languages: English as an attachment in your email.

The manual is 3,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Fluke 77 Series IV

Fluke 77 Series IV User Manual - German - 22 pages

Fluke 77 Series IV User Manual - Dutch - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info