764336

Fluke 754 Manual

67
Zoom out
Zoom in
Previous page
1/130
Next page
Documenting Process Calibrator
Source Mode
55
Thermocouple Simulation
Note
See “Temperature Measurement” for a table of
thermocouple types that are supported by the
Product.
Connect the Product TC input/output to the instrument
under test with thermocouple wire and the correct
thermocouple mini-connector (polarized thermocouple plug
with flat, in-line blades spaced 7.9 mm (0.312 in) center to
center).
Caution
To prevent possible damage to the Product, do
not try to force a miniplug in the wrong
polarization. One pin is wider than the other.
Figure 19 shows this connection. To simulate a
thermocouple:
1. Attach the thermocouple leads to the correct TC
miniplug, and then to the TC input/output. See Figure
15.
2. If necessary, push for SOURCE mode.
3. Push t, and then push to select the TC sensor
type. The display asks you to select the thermocouple
type.
4. Push or followed by to select the necessary
thermocouple type.
5. Push or followed by to select Linear T
(default), or Linear mV, (to calibrate a temperature
transmitter that responds linearly to millivolt inputs).
6. Record the temperature to simulate as prompted by the
display and push .
Note
If you use copper wire instead of thermocouple
wire, the reference junction is no longer inside the
Product. The reference junction moves to the
instrument (transmitter, indicator, controller, etc.)
input terminals. The external reference
temperature must be measured accurately and
recorded into the Product. To do this, push
and set Ref. Junc. Compensat. and Ref. Junc.
Temp.. After you record the external reference
temperature, the Product corrects all voltages to
adjust for this new reference junction temperature.
… 67 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fluke 754 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fluke 754 in the language / languages: English as an attachment in your email.

The manual is 5,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Fluke 754

Fluke 754 User Manual - German - 130 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info