764278
4
Zoom out
Zoom in
Previous page
1/16
Next page
715 English Instruction Sheet
Page 4
1. With the Calibrator OFF, press the O key. P.S.xx is
displayed, where xx is the turn-off time in minutes. OFF
means the power saver is disabled.
2. Press ] and/or } to increase or decrease the turn-
off time in minutes.
3. To disable, press } until the display shows OFF.
HART TM Resistor Mode
The calibrator has a user selectable 250 ohm HARTTM resistor to
facilitate use with HARTTM communication devices. The resistor
can be switched in/out at any time by simultaneously pressing
the V and A keys. Use a HARTTM communicator when
measuring dc mA with loop power or sourcing mA.
Span Check Feature
The calibrator allows the users to store 0% and 100% setpoints
for each output function. Once setpoints are stored, the span
check feature allows the user to quickly toggle back and forth
from 0% to 100% or to step in 25% increments.
Automatic step and ramp modes can be enabled while in the
span check mode by simultaneously pressing the ] } keys.
First select the desired output mode (V,mV or mA) then preceed
to store the setpoints:
1. Storing 0% and 100% Setpoints
2. Using the ] } controls set the output to the desired
output value for 0%.
3. Press the ] } scroll keys simultaneously to store
the 0% value.
4. Now using the ] } controls set the output to the
desired output value for 100%
5. Again, press the ] } scroll keys simultaneously to
store the 100% value.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fluke 715 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fluke 715 in the language / languages: English as an attachment in your email.

The manual is 0,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Fluke 715

Fluke 715 User Manual - German - 16 pages

Fluke 715 User Manual - Dutch - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info