764277
11
Zoom out
Zoom in
Previous page
1/22
Next page
mA Calibrator
Simulating a Transmitter
7
Simulating a Transmitter
When simulating the operation of a transmitter, the
Calibrator regulates the loop current to a known value
selected by you.
A 12 V to 28 V loop supply must be available. Insert the
test leads as shown below.
707Ex
mA CALIBRATOR
COM
+
Power
supply
28 V dc
max.
Press until
SIMULATE mA is
displayed.
to step current
up or down 25 %
of full scale.
Press
Turn to step
up/down 0.1 A.
Press in and rotate
to step up/down in
100 A increments.
Press simultaneously
once for slow ramp
twice for fast ramp
three times for
stepped ramp.
AQV05F.EPS
Auto Ramping the mA Output
Auto ramping allows you to continuously apply a varying
current from the Calibrator to a passive (sourcing) or
active (simulate) loop. Your hands remain free to test the
transmitter’s response.
Press B + C simultaneously to enter the Auto Ramp
mode and step to a ramp type.
The Calibrator applies or controls a continuously repeating
mA signal over a 0-20 mA or a 4-20 mA span in one of
three ramp types:
Slow (e) 0 % to 100 % to 0 % smooth ramp over 40 sec.
Fast (g) 0 % to 100 % to 0 % smooth ramp over 15 sec.
Step (f) 0 % to 100 % to 0 % stair-step ramp in 25 %
steps, pausing 5 sec at each step.
To exit, press any pushbutton or turn the Calibrator off.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fluke 707Ex at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fluke 707Ex in the language / languages: English as an attachment in your email.

The manual is 0,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Fluke 707Ex

Fluke 707Ex User Manual - German - 22 pages

Fluke 707Ex User Manual - Dutch - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info