764270
30
Zoom out
Zoom in
Previous page
1/44
Next page
381
Users Manual
26
Resistance/Continuity
To measure resistance or continuity:
1. Turn the Rotary Function Switch to K.
2. Remove power from the circuit being tested.
3. Connect the black test lead to the COM terminal and the red test lead to the G
terminal.
4. Measure the resistance by touching the probes to the desired test points of the circuit.
5. View the reading on the display.
If the resistance is < 30 Ω, continuity is indicated by a beeper continuously sounding. If the
display reads OL, the circuit is open.
Inrush Current Measurement (Jaw and Flexible Current Probe)
The Meter can capture the initial inrush current when starting a device such as a motor or light
ballast. To measure the inrush current:
1. With the device under test off, turn the Meter Rotary Function Switch to A, C, or D if the
Flexible Current Probe is being used for the measurement.
2. Center the Jaw or Flexible Current Probe around the device’s live wire.
3. Push E on the Meter.
4. Turn on the device under test. The inrush current (spike) is displayed on the Meter display.
See Figure 7.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fluke 381 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fluke 381 in the language / languages: English as an attachment in your email.

The manual is 1,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Fluke 381

Fluke 381 User Manual - German - 44 pages

Fluke 381 User Manual - Dutch - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info