763957
12
Zoom out
Zoom in
Previous page
1/88
Next page
287/289
Users Manual
2
Make sure the battery door is closed and
latched before operating the Meter.
Remove test leads from the Meter before
opening the battery door.
Inspect the test leads for damaged insulation
or exposed metal. Check the test leads for
continuity. Replace damaged test leads before
you use the Meter.
Do not apply more than the rated voltage, as
marked on the Meter, between the terminals or
between any terminal and earth ground.
Never operate the Meter with the cover
removed or the case open.
Use caution when working with voltages above
30 V ac rms, 42 V ac peak, or 60 V dc. These
voltages pose a shock hazard.
Use only the replacement fuses specified by
the manual.
Use the proper terminals, function, and range
for measurements.
Avoid working alone.
When measuring current, turn off circuit power
before connecting the Meter in the circuit.
Remember to place the Meter in series with the
circuit.
When making electrical connections, connect
the common test lead before connecting the
live test lead; when disconnecting, disconnect
the live test lead before disconnecting the
common test lead.
Do not use the Meter if it operates abnormally.
Protection may be impaired. When in doubt,
have the Meter serviced.
Do not operate the Meter around explosive
gas, vapor, or dust.
Use only 1.5 V AA batteries, properly installed
in the Meter case, to power the Meter.
When servicing the Meter, use only specified
replacement parts.
When using probes, keep fingers behind the
finger guards on the probes.
Do not use the Low Pass Filter option to verify
the presence of hazardous voltages. Voltages
greater than what is indicated may be present.
First, make a voltage measurement without the
filter to detect the possible presence of
hazardous voltage. Then select the filter
function.
Only use test leads that have the same voltage,
category, and amperage ratings as the meter
and that have been approved by a safety
agency.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fluke 289 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fluke 289 in the language / languages: English as an attachment in your email.

The manual is 2,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Fluke 289

Fluke 289 User Manual - German - 92 pages

Fluke 289 User Manual - Dutch - 90 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info