764224
48
Zoom out
Zoom in
Previous page
1/64
Next page
27 II/28 II
Users Manual
38
Touch top half
of input contacts
Good 11 A fuse: 00.0 Ω to
00.5 Ω
Replace fuse: OL
Good 0.44 A fuse: 0.995 kΩ to
1.005
Replace fuse: OL
gaq105.eps
Figure 10. Current Fuse Test
How to Replace the Batteries
Replace the batteries with three AA batteries
(NEDA 15A IEC LR6).
XWWarning
To avoid false readings, which could lead to
possible electric shock or personal injury,
replace the battery as soon as the battery
indicator () appears. If the display shows
batt” the Meter will not function until the
battery is replaced.
MSHA approved for use with three Energizer
P/N E91 or three Duracell P/N MN1500 1.5
volt, “AA” alkaline batteries only. All cells are
to be replaced at the same time with identical
part number cells in fresh air locations only.
Replace the battery as follows, refer to Figure 11:
1. Turn the rotary switch to OFF and remove the test
leads from the terminals.
2. Remove the six Phillips-head screws from the case
bottom and remove the battery door ().
Note
While lifting the battery door, ensure the rubber
gasket stays attached to the battery
compartment barrier.
3. Remove the three batteries and replace all three with
AA Alkaline batteries ().
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fluke 28 II at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fluke 28 II in the language / languages: English as an attachment in your email.

The manual is 1,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Fluke 28 II

Fluke 28 II User Manual - German - 64 pages

Fluke 28 II User Manual - Dutch - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info