764223
49
Zoom out
Zoom in
Previous page
1/64
Next page
Digital Multimeters
Service and Parts
39
4. Ensure the battery compartment gasket () is
properly installed around the outside edge of the
battery compartment barrier.
5. Replace the battery door by aligning the battery
compartment barrier with battery compartment.
6. Secure the door with the six Phillips-head screws.
How to Replace the Fuses
Referring to Figure 11, examine or replace the Meter's
fuses as follows:
1. Turn the rotary switch to OFF and remove the test
leads from the terminals
2. Refer to step 2 under the How to Replace the
Batteries section above to remove the battery door.
3. Remove the fuse compartment seal () from the
fuse compartment.
4. Gently lift out the fuse compartment door () from
the fuse compartment.
5. Remove the fuse by gently prying one end loose,
then sliding the fuse out of its bracket ().
6. Install ONLY specified replacement fuses with the
amperage, voltage, and speed ratings shown in
Table 9. The 440-mA fuse is shorter than the 10-A
fuse. For correct placement of each fuse, note the
marking on the printed circuit board under each fuse.
7. Replace the fuse compartment door by aligning the
arrow on the fuse door with the arrow on the case
bottom and lowering the door into the fuse
compartment.
8. Replace the fuse compartment seal by aligning the
tab on the seal with the outline on the case bottom.
Ensure the seal () is properly seated.
9. Refer to steps four through six under the Replacing
the Batteries section above to reinstall the battery
door.
Service and Parts
If the Meter fails, check the battery and fuses. Review this
manual to verify proper use of the Meter.
Replacement parts and accessories are shown in Table 9
and Figure 12.
To order parts and accessories, refer to “How to Contact
Fluke.
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fluke 27 II at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fluke 27 II in the language / languages: English as an attachment in your email.

The manual is 1,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Fluke 27 II

Fluke 27 II User Manual - German - 64 pages

Fluke 27 II User Manual - Dutch - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info