Manual Fluke 190-062-III (page 52 of 98) (English)

775825

Zoom out

Zoom in

1/98

190 Series III

Users Manual

Edge Triggers

If the signal is unstable or has a very low frequency, use edge triggering to obtain full manual

trigger control.

To trigger on rising edges of the input A waveform:

1. Press T to show the TRIGGER key labels.

2. Press 4 to open the TRIGGER OPTIONS menu.

3. Use the cursor and E to open the TRIGGER ON EDGE menu.

When Free Run is selected, the test tool updates the screen even if there are no triggers. A

waveform always appears on the screen.

When On Trigger is selected, the test tool needs a trigger to display a waveform. Use this

mode if you want to update the screen only when valid triggers occur.

When Single Shot is selected, the test tool waits for a trigger. After receiving a trigger, the

waveform is displayed and the instrument is set to HOLD.

In most cases, use the Free Run mode.

4. Use the cursor and E to select Free Run, jump to Trigger Filter.

5. Use the cursor and E to set Trigger Filter to Off.

Observe that the key labels at the bottom of the screen have adapted to allow further

selection of specific edge trigger settings.

Noisy Waveform Triggers

To reduce jitter on the screen when triggering on noisy waveforms, you can use a trigger filter.

Continue from step 3 of the previous example:

1. Use the cursor and E to select On Trigger and jump to Trigger Filter.

2. Use the cursor and E to set Noise Reject or HF Reject to On. This is indicated by a

taller trigger icon.

When Noise Reject is on, an increased trigger gap is applied. When HF Reject is on, HF

noise on the (internal) trigger signal is suppressed.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fluke 190-062-III in the language / languages: English as an attachment in your email.

The manual is 9.23 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fluke 190-062-III Manual

Product: