656306
15
Zoom out
Zoom in
Previous page
1/18
Next page
True RMS Multimeters
Testing the Fuse (Models 111 and 112)
11
Testing the Fuse (Models 111 and 112)
WWarning
To avoid electrical shock or injury, remove the test
leads and any input signals before replacing the fuse.
Test fuse as shown below.
<.5
OK
OK
aej12f.eps
Replacing the Battery and Fuse
WWarning
To avoid shock, injury, or damage to the Meter:
Remove test leads from the Meter before opening the
case or battery door.
Use ONLY a fuse with the amperage, interrupt,
voltage, and speed ratings specified.
Replace the battery as soon as the low battery
indicator (
b ) appears to avoid false readings.
To remove the battery door:
1. Remove screw from battery door.
2. Use the finger recess to lift door slightly.
3. Pull door toward bottom of Meter to release the latch.
4. Lift the door straight up to separate from case.
The battery fits inside the battery door, which is then inserted
straight into the case until it clicks into place. Do not attempt to
install the battery directly into the case.
Fuse Battery
aej13f.eps
F1 Fuse (Models 111 and 112). 11 A, 1000 V, FAST.
Minimum Interrupt Rating 17000 A.
Use only Fluke Part Number 803293.
Battery, 9 V Alkaline, NEDA 1604A / IEC 6LR61
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fluke 111 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fluke 111 in the language / languages: English as an attachment in your email.

The manual is 0,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info