656305
10
Zoom out
Zoom in
Previous page
1/22
Next page
110/113/114/115/117
Users Manual
6
Display HOLD
XW Warning
To avoid electric shock, when Display HOLD is activated, be aware that the display will not
change when you apply a different voltage.
In the Display HOLD mode, the Meter freezes the display.
1. Push f to activate Display HOLD. (K shows on the display.)
2. To exit and return to normal operation, push f or turn the rotary switch.
Backlight
Push Q to toggle the backlight on and off.
The backlight automatically turns off after 40 seconds. To disable backlight auto-off, see Power-Up Options.
Manual and Autoranging
The Meter has both Manual and Autorange modes. The Meter defaults to Autorange. To toggle between Manual
and Autorange, push qfor 1 second.
In the Autorange mode, the Meter selects the range with the best resolution.
In the Manual Range mode, you override Autorange and select the range yourself. Push qfor 1 second to
enter Manual range. (Manual shows on the display.) Push qto increment the range. After the highest
range, the Meter wraps to the lowest range.
Note
You cannot manually change the range in the MIN MAX AVG or Display HOLD modes. If you push
qwhile in MIN MAX AVG or Display Hold, the Meter beeps twice, indicating an invalid operation and
the range does not change.
Power-Up Options
To select a Power-Up Option, hold down the button indicated in Table 5 while turning the Meter from OFF to any
other function. Power-Up Options are canceled when you turn off the Meter and when sleep mode is activated.
Table 5. Power-Up Options
Button Power-Up Options
fTurns on all display segments until button is released.
pDisables beeper. bEEP shows when enabled.
q113 - Turns on all display segments until button is released.
115, 117 - Enables low impedance capacitance measurements. LCAP shows when enabled.
gDisables Battery Saver™ (Sleep mode). PoFF shows when enabled.
QDisables auto backlight off. LoFF is displayed when enabled.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fluke 110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fluke 110 in the language / languages: English as an attachment in your email.

The manual is 1,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Fluke 110

Fluke 110 User Manual - English - 18 pages

Fluke 110 User Manual - German - 22 pages

Fluke 110 User Manual - Dutch - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info