615275
43
Zoom out
Zoom in
Previous page
1/52
Next page
Manual Driver DMR250 Rower - 43
4. Use
General use
The Driver DMR250 computer works on two AA batteries. After placing the batteries
the display of will automatically turn on. After 4 minutes of inactivity the computer
will go into standby modus. Press any button to activate the computer from standby
modus.
The computer can receive a heart rate signal from an optional chest belt. The heart
rate will be automatically displayed on the PULSE window of the computer display.
When you start rowing the TMR, CNT, CAL and TOTAL CNT values will start counting.
You are also able to set target values.
Entering target values
1. If the computer is in standby modus press any button and the computer display
will light up. The computer automatically enters SCAN function.
2. Press the ENTER key to go to the next function. The function order is:
TMR>CNT>DIST>CAL>TOTAL CNT>PULSE>SCAN.
3. To set target value of a function:
- TMR – Press the UP key to make 01:00 upward adjustment and press the DOWN
key to make 01:00 downward adjustment. Press RESET key to clear value to 0.
- CNT – Press the UP key to make 10 upward adjustment and press the DOWN key
to make 10 downward adjustment. Press RESET key to clear value to 0.
- CAL – Press the UP key to make 10 upward adjustment and press the DOWN key
to make 10 downward adjustment. Press RESET key to clear value to 0.
- PULSE -Press the UP key to make 1 upward adjustment and press the DOWN
key to make 1 downward adjustment. (An optional chest belt is necessary for
counting this target value)
4. Your ready to start exercising. All entered values will start to countdown. The
training session is finished when you reach one of the entered target values.
During a training session you can always adjust the resistance level by rotating the
resistance adjustment knob.
The metal and plastic parts of the product can be cleaned by using standard
cleaning products. However, make sure that all parts are completely dry before they
are used again.
Flow Fitness advises to fasten nuts and bolts, check and fasten pivot points once
every six weeks. For fastening use the tool supplied with the product.
To prevent unnecessary wear, the product can only be used indoors and in a dry
environment.
4.4 Maintenance
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for FlowFitness DRIVER DMR250 Roeitrainer at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of FlowFitness DRIVER DMR250 Roeitrainer in the language / languages: English, Dutch as an attachment in your email.

The manual is 2,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info