Every 1 or 2 months (even if the treadmill is not in use) or every
50 hours of use, the sliding surface under the running deck
needs to be lubricated with the included silicone lubricant. Make
sure that the power is disconnected and loosen the adjusting
bolts of the rear roller. Lubricate the surface, distribute the
silicone lubricant evenly. When you are finished fastening the
adjustment bolts of the rear roller. Center the treadmill again as
described below.
Within the first weeks of using the treadmill, it is possible that you need to centre the belt. For example this can happen when applying more pressure to the
left foot over your right.
Make sure the treadmills is running with a speed between 3 and 5 KPH. At the back of the frame there are two adjustment bolts. These bolts allow you to
adjust the rear roller. When the treadmill is running to the left, you need to turn the left adjusting bolt clockwise on the and the right adjustment bolt counter
clockwise. In the event that the treadmill is right, you have to turn the left adjustment bolt counter-clockwise and the right adjustment screw clockwise. Make
sure the belt stays well tensioned and is not waving.
Maintaining the sliding surface
Centring the belt
The metal and plastic parts of the product can be cleaned by using standard cleaning products. However, make sure that all parts are completely dry before
they are used again.
Flow Fitness advises to fasten nuts and bolts, check and fasten pivot points once every six weeks. For fastening use the tool supplied with the product.
To prevent unnecessary wear, the product can only be used indoors and in a dry environment.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Flow Fitness PERFORM T3i at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Flow Fitness PERFORM T3i in the language / languages: English, Dutch as an attachment in your email.
The manual is 3,71 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.