615252
41
Zoom out
Zoom in
Previous page
1/60
Next page
Manual Glider DCT125 Crosstrainer - 41
4. Use
Step 2
1. Place the resistance knob (97) onto the handlebar post (10) and feed the
adjustment cable (97) downwards. Fasten the Screw with a washer a-1.
2. Slide the oval cover (49) over the handlebar post (10). As displayed in fig. b.
3. Connect the upper adjustment cable (97) with the lower adjustment cable (98)
as displayed in figure c-1. Pull the red plastic rotatable tube of the upper cable
back and downwards. The end of the red tube should be placed as displayed
within figure c-4. By rotating the read tube the minimum resistance can increased
or decreased. Rotate clockwise to decrease the resistance and rotate counter
clockwise to increase the resistance.
4. Check if the cables are connected correctly by rotating the resistance knob. The
end of the upper cable (97) should increase or decrease tension in the lower
cable (98). Connect the upper (29) and lower (30) computer cable.
5. Assemble the left pedal and right pedal, first place cover (17) on the pedal axle
and then fasten Allen bolt (18) as displayed in fig d-1 and d-2
49
(b)
10
c-1
c-2
c-3
c-4
(a)
d-1
d-2
a-1
a-2
30
29
98
97
17
17
18
97
98
18
17
B
(x2)
(x2)
97
10
a
c-1
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Flow Fitness GLIDER DCT125 crosstrainer at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Flow Fitness GLIDER DCT125 crosstrainer in the language / languages: English, Dutch as an attachment in your email.

The manual is 4,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info