738019

Flow Fitness DTM200 i Manual

23
Zoom out
Zoom in
Previous page
1/27
Next page
Manual Runner DTM200i - 4544 - Manual Runner DTM200i
Text box Ctrl + Shift + Right Mouseclick to edit
3. Use3. Use
Cleaning
The metal and plastic parts of the product can be cleaned by using standard cleaning products. However, make sure
that all parts are completely dry before using the product again.
To prevent unnecessary wear, the product may only be used indoors and in a dry environment.
Maintaining the sliding surface
Every 1 or 2 months (even if the treadmill is not in use) or every 50 hours of use, the sliding surface under the
running belt needs to be lubricated with the included silicone lubricant. Make sure that the power is disconnected
and loosen the adjusting bolts of the rear roller. Lubricate the surface, distribute the silicone lubricant evenly. When
you are finished fastening the adjustment bolts of the rear roller. Center the treadmill again as described below.
We advise Flow Fitness Treadmill lotion after you have emptied the included silicon lubricant. With the Smart Straw
on the Flow Fitness Treadmill lotion you are able to lubricate the belt without loosening any bolts.
3.9 Maintenance
Centering and tensioning the belt
Within the first weeks of using the treadmill, it is possible that you need to centre the belt. For example this can
happen when applying more pressure to the left foot over the right.
Make sure the treadmill is running with a speed between 3 and 5 KPH. At the back of the frame there are two
adjustment bolts. These bolts allow you to adjust the rear roller. When the treadmill is running to the left, you need
to turn the left adjusting bolt clockwise and the right adjusting bolt counter clockwise. When the treadmill is pulling
to the right, you have to turn the left adjusting bolt counter-clockwise and the right adjusting screw clockwise. Make
sure the belt stays well tensioned and is not waving.
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Flow Fitness DTM200 i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Flow Fitness DTM200 i in the language / languages: English, Dutch as an attachment in your email.

The manual is 3,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info