542114
63
Zoom out
Zoom in
Previous page
1/66
Next page
Manual Avenue TM2000 Treadmill - 63
5. General information
Problem:
The display of the treadmill is not switching on.
Solution:
- Check if the plug is connected to a grounded outlet
- Check if the switch near the adapter cable is set to ON or I.
- Check if the fuse near the switch . If the fuse is broken contact your reseller.
Problem:
Segments of the screen don’t light up.
Solution:
The screen LED are damaged, contact your reseller.
Problem:
The screen shows “- -”.
Solution:
The safety key is not placed (correctly). Place the safety key into the designated
area of the treadmill.
Problem:
The screen shows error code E1
Solution:
The speed sensor transmits a abnormal value. Please follow these steps:
1. Remove power from the treadmill (unplug the treadmill). Wait 10 seconds before
powering the treadmill again.
2. Press START and check the following:
a. Does the belt start to move?
b. If the belt is moving, is the screen still showing the E1 error?
3. If the treadmill is working normal again, lubricate the belt and centre / tension it
as described in chapter 4.4 of this manual. When the belt is still not moving or the
E1 error is still visible contact your reseller.
5.3 Troubleshooting
63


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Flow Fitness AVENUE TM2000 Loopband at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Flow Fitness AVENUE TM2000 Loopband in the language / languages: English, Dutch as an attachment in your email.

The manual is 3,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info