5
Introduction
These operating instructions will help
you to use your pressure spraying
device properly, safety and economically.
Every person who uses, cleans or
disposes of this pressure spraying device
must have taken note of the contents of
these operating instructions. These
operating instructions are a component of
the pressure spraying device. Please
always store these instructions with the
pressure spraying device. When passing
on the pressure spraying device, ensure
that the instructions are passed on as well.
• Explanation of the symbols on
the device:
Do not leave the pressure
spraying device standing in the
sun. There is a risk of explosion!
Do not spray into naked flames!
Keep away from naked flames
and heat sources. Seal containers
securely. Store in a fireproof way!
Do not use easily flammable
fluids!
Do not use corrosive
substances!
Volume flow: 0.5 litres/min. at a
maximum of 2.5 bar!
Protect from frost and store
away from frost.
Store at 0°C – 40°C in a dry,
dust-free location.
Usable filling level,
approximately 5 litres.
Maximum permitted operating
pressure approximately 2.5 bar.
When pumping, always watch
the manometer to check the
operating pressure.
• Intended use
The pressure spraying device is used
only for spraying the following fluids in
the house, garden or in greenhouses.
- Water,
- Mild, PH-neutral cleaning agents
The sprayed agent may only be sprayed
in the concentration specified by the
manufacturer of the agent. If in doubt,
consult the manufacturer of the agent.
The pressure spraying device is
designed for private use only.
Incorrect use includes, in particular, the
spraying of the following:
- Pesticides
- Weed sprays
- Disinfectants
- Fertilisers
- Solvents or liquids containing
solvents,
-Oil
- Easily flammable fluids,
- Corrosive fluids such as acids or lye.
Abraham Diederichs GmbH & Co. oHG
accepts no responsibility for damages
caused as a result of incorrect use.
