663306
24
Zoom out
Zoom in
Previous page
1/106
Next page
24
GB IE
Never suspend the pump by the hose.
Ensure that the equipment is
not hung up or held by the
mains cable. There is a risk
of electric shock from dam-
aged mains cables.
Note that, over time, dirt and sand
may collect on the bottom of the
shaft, which could damage the
pump.
We recommend standing the pump
on a brick.
If the water level is too low, the silt
in the shaft can quickly dry out and
impede the pump when warming
up.
Mains Connection
The pump you have purchases is already
tted with an earthed plug. The equipment
is designed for connection to an earthed
wall socket with a residual current operat-
ed device (RCD switch) at 230 V ~ 50Hz.
Connecting the Pressure Line
The pump is installed
- Either with a xed pipeline
- Or with a exible hose line.
1. Screw the bracket adapter (10)
onto the pump outlet (3).
2. Insert the seal (12b) into the
backow preventer (12).
3. Insert the backow preventer
(12) between the angle adapter
(10) and reducer (9) in such
a way that the valve opens in
the direction of ow and closes
against the direction of ow.
4. Fit the hose over the reducer (9)
and secure it with a hose clamp.
Or use a screw connection at
the bracket adapter (10) or the
reducer (9).
Outlet with a 1½” internal thread on
the pump for connection of the angle
adapter (10) or for direct connection
of a hose with a 1½” external thread;
Outlet with 1½“ external thread at the
bracket adapter (10) for connection of
the reducer (9) or a 1½“ screw con-
nection;
Outlet on reducer (9) for connection of
a 1¼” or 1½” hose as a compression
joint (xing with a hose clamp);
Outlet with 1“ external thread at the re-
ducer (9) for connection of a 1“ screw
connection;
Outlet with 1½“ thread at the reducer
(9) for connection of a 1“hose as
clamp connection (xing with a hose
clamp).
Note that the particle size may
be max. 19 mm if the reducer
(Ø19.3mm) is used, otherwise
the reducer and hose can become
blocked.
To increase pump output, the backow
stopper (12) may be taken out of the angle
adaptor (10) (see “replacing backow
stopper”). This is particularly recom-
mended for hose connections smaller than
1“. Please bear in mind that the water may
then ow back during pumping, or in the
event of a power cut.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Florabest FTS 1100 C3 - IAN 279527 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Florabest FTS 1100 C3 - IAN 279527 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 2,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info