663332
10
Zoom out
Zoom in
Previous page
1/66
Next page
10
GB IE
Operational start-up
Assembly
To screw-on the adaptor:
1. Screw the angle adaptor (12)
and the hose adaptor (10) onto
the pump outlet (5).
Tomounttheoatswitch
height adjustment:
2. Loosen the screw of the oat
switch height adjustment (7) and
push the adjustment over the
oat switch guideway (9). Check
that the oat switch cable (8)
moves upward (arrow
to point
up) (see „Operation“).
Connection of the pressure
line
The installation of the submersible water
pump is implemented either
- with xed pipe or
- with exible hose line
If using a ½” hose, attach the
hose over the pump’s hose con-
nection (10) and fasten it with a
hose clamp if necessary.
To use a ¾”, 1“ or 1½” hose,
cut off the connection above and
attach the hose over the correct
connection (xing with a hose
clamp).
For the use of a tap connector
with internal thread (G 1”) for
connecting external hose con-
nection systems, cut the top three
connections off directly over the
G 1” threaded pipe.
Connect a tap connector with
internal thread (G 1 ½”) directly
to the angle adapter (
12).
The measurement of the maximum
performance data takes place
under optimal conditions, such as
a straight, direct exit. The angle
adaptor (
12) and the backow
stopper (
11) may reduce output.
To increase pump output, the backow
stopper (11) may be taken out of the angle
adaptor (12) (see
“replacing backow
stopper”). This is particularly recom-
mended for hose connections smaller than
1“. Please bear in mind that the water may
then ow back during pumping, or in the
event of a power cut.
To erect/suspend
The pump can be erected or sus-
pended in the water.
The cord (
13) contained in the
delivery contents may be used to
suspend and/or extract the pump.
The pump shaft should have the dimen-
sions 40 x 40 x 50cm at least, so that the
oat switch can move freely.
Fix the nylon rope (13) onto the car-
rying handle (1).
Ensure that the equipment is
not hung up or held by the
mains cable. There is a risk
of electric shock from dam-
aged mains cables.
Note that, over time, dirt and sand
may collect on the bottom of the
shaft, which could damage the
pump.
We recommend placing the pump
on a brick or a grid.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Florabest FTP 400 D3 - IAN 275663 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Florabest FTP 400 D3 - IAN 275663 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info