Manual Florabest FTP 400 C2 - IAN 96809 (page 35 of 46) (English, German, Dutch)

783799

Zoom out

Zoom in

1/46

• Disconnect the mains plug from the

socket before all work on the equip-

ment, in case of leaks in the water sys-

tem, during work breaks, and when not

in use.

• The cross-section of mains connection

lines must be no smaller than rub-

ber hose lines with the designation

H07RN8-F. The line must be 10 m long.

The exible lead cross-section of the

extension cord must at least 2.5mm2.

Start-up

Assembly

To screw-on the adapter:

1. Screw the angle adapter (11)

and the adapter with the hose

connection (9) onto the pump

outlet (5).

Installing the oat switch

2. Position the oat switch cable (7)

in the oat switch grid (8).

Connection of the pressure

line

The installation of the submersible water

pump is implemented either

- with xed pipe or

- with exible hose line

• If using a ½” hose, attach the

hose over the pump’s hose con-

nection (9) and fasten it with a

hose clamp if necessary.

• To use a ¾”, 1“ or 1½” hose, cut

off the connection above and at-

tach the hose over the correct con-

nection (xing with a hose clamp).

• To use a tap adaptor (IG1½“)

to connect external hose connec-

is in operation.

• Before operating your new pump, have

a specialist check:

- The earthing, the protective multiple

earthing; the residual current circuit

breaking must be compliant with

the safety regulations of the energy

supply company and function with-

out fault,

- The protection of the electrical plug

connections from the wet.

• If there is a risk of ooding, x the

plug connections in an area that is safe

from ooding.

• Ensure that the mains voltage matches

the specications on the rating plate.

• The electrical installation shall be ac-

cording to national wiring rules.

• Connect the equipment only to a sock-

et with a residual current protection

device (residual current circuit breaker)

with a rated current of not more than

30 mA; minimum fuse 6 amperes.

• Before each use, check the equipment,

cable and plug for damage. Defec-

tive cables are not to be repaired, but

rather replaced by new ones. Have

damage on your equipment repaired

by an authorised specialist.

• If the power cable for this equipment is

damaged, it must be replaced by the

manufacturer, a customer service agent

of the same or a similarly qualied per-

son in order to prevent hazards.

• Do not pull the plug from the socket by

the cable. Protect the cable from heat,

oil and sharp edges.

• Do not carry or x the equipment by

the cable.

• Use only extension cables that are pro-

tected from spray water and designed

for outdoor use. Always fully unroll a

cable drum before use. Check the ca-

ble for damage.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Florabest FTP 400 C2 - IAN 96809 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 1.77 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Florabest FTP 400 C2 - IAN 96809 Manual

Product: