Manual Florabest FSM R1 - KH 3161 (page 9 of 13) (English)

558714

Zoom out

Zoom in

1/13

11 GB/IE/CY

J Check before use that the cutting edge is not

blunt and that its mounting is not damaged. Re-

place blunt or damaged cutting tools in a com-

plete set so as not to create a dynamic

unbalance.

J Check the grass box

regularly for signs of

wear or deformation.

J Regularly check all nuts and screws for their

tightness, to ensure a faultless operating condi-

tion for the appliance.

J Avoid all collisions between the appliance and

foreign objects (e.g. branches, stones, metal

parts and toys)! Check the grassed area over

and remove all foreign objects!

J Adjust the cutting height of the appliance such

that thecurved blade bar

cannot make con-

tact with the ground (unevenness)!

J In the event of a collision with a foreign object

or unusual vibrations, check the appliance for

possible damage and, if need be, arrange for

it to be repaired.

J Never use the appliance with damaged protec-

tive ﬁttings or coverings or deﬁcient protective

equipments such as deﬂective or grass box

components.

J For collecting the clippings, use the grass box

exclusively

J Only exchange damaged or worn parts for

original spare parts!

J Only use replacement cutting tools of the same

type as those ﬁtted into the appliance.

J Switch the lawn mower oﬀ and remove the

plug when you transport it, cross areas other

than grass or bring the appliance from or to an

area to be mown.

 Commissioning

 Assembly

c Danger!

J Carry out the assembly ONLY with the appliance

switched oﬀ and separated from the power supply!

J Avoid causing damage to the power cable

e.g. through squashing it!

Tip!

Lift the appliance from its packaging together

with a second person.

Fasten the steering shaft to the appliance.

j Attach the power cable strain relief

to the

lower shaft

j Place a retaining screw cover

on to each of

the tube ends of the lower shaft handle

see Fig. A.

j Insert the tube ends of the lower shaft

into

the two holes in the housing

(see Fig. A).

j Screw them down tightly with the two retaining

screws

j Now push the the retaining screw covers

over each of the retaining screws.

j Fasten the upper shaft

with the help of both

connecting screws

to the lower shaft

Secure the power cable

with both cable clips

to the upper

and lower shafts

(see

Fig. C).

Assembling the

grass box

j Exactly ﬁt the 2 grass box lower components

together with the grass box upper component.

Begin with the lower components.

The fasteners snap in clearly.

Q

Grass box - ﬁtting / removing

c Danger!

J Switch the appliance oﬀ! Wait until the curved

blade bar

comes to a complete stop!

Fitting

j Raise up the impact protection ﬂap

j Attach the grass box

to the upper attach-

ment devices

and ﬁt it into the clippings

ejection shaft

(see Fig. B).

j Lay the impact protection ﬂap

onto the

grass box

General safety advice /Commissioning

I need a belt for it.
It's a grooved belt an has a number. Submitted on 4-10-2023 at 19:20
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Florabest FSM R1 - KH 3161 in the language / languages: English as an attachment in your email.

The manual is 0,9 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Florabest FSM R1 - KH 3161

Florabest FSM R1 - KH 3161 User Manual - German, Dutch, French, Italian, Portuguese - 62 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Florabest FSM R1 - KH 3161 Manual

Product: