539968
47
Zoom out
Zoom in
Previous page
1/56
Next page
47
GB
Remove uff or particles of bre, which
may have found their way into the
pump housing (
9) and become
stuck, by using a jet of water.
Clean any deposits adhering to the
oating switch (
6) with clean water.
Cleaning the lter
In the suction foot, the pump has a remov-
able lter, designed to protect it from dirt.
According to the level of dirt in the water,
this should from time to time be checked
and cleaned when necessary.
1. Unplug the appliance from the
power supply.
2. Remove the 4screws on the under-
neath of the pump housing (9).
3. Take the suction foot (8) off the
pump and take out the lter (7).
4. Wash the lter (7) under running
water and put it back in place.
5. Put the suction foot (8) back on
the pump and fasten it with the
4screws.
Cleaning the impeller wheel
If deposits in the pump housing become
too heavy, the bottom part of the pump
must be dismantled as follows.
1. Remove the 4screws on the bottom of
the pump casing and pull off the suc-
tion foot (
8).
2. Unscrew the paddle wheel cover (
24) (6 screws).
3. Clean the inside wall of the pump hous-
ing and the impeller wheel with clear
water.
4. For re-assembly, follow the same steps
in reverse.
Storage
Clean the pump before storage.
Store the appliance in a dry, frost-free
place, and where children cannot gain
access to it.
When the pump is not to be used for
a longer period, it must be thoroughly
cleaned after its last use, and before it
is next used. Otherwise there may be
problems in starting the pump, caused
by deposits and residues.
To store, push the dismantled
aluminium tubes (13/14/15+20)
onto the push-on ports (10) and x
them into the mountings (11).
All other work on the pump, and
in particular opening it, must be
carried out by a specialist electrical
service engineer. If any repairs are
necessary, you should always get
in touch with the Service Centre.
Waste disposal
and environmental
protection
Be environmental. Return the tool, acces-
sories and packaging to a recycling centre
when you are nished with them.
Machines do not belong with do-
mestic waste.
Hand over the device at an utilization loca-
tion. The plastic and metal parts employed
can be separated out into pure materials
and recycling can be implemented. Ask
your Service Center about this.
Defective units returned to us will be dis-
posed of for free.
estimate.
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Florabest FRP 350 C2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Florabest FRP 350 C2 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info