539218
9
Zoom out
Zoom in
Previous page
1/22
Next page
9
IEGB
Do not work with equipment that is dam-
aged, incomplete, or has been modied
without the authorisation of the manu-
facturer. Do not use the equipment with
damaged safety devices or screens or
with missing safety equipment such as
deection and/or grass collection de-
vices.
Do not overload the equipment. Work
only within the specied power range
and do not change the regulator set-
tings on the motor. Do not use low-
powered machines for heavy work. Do
not use your equipment for purposes
other than those for which it is de-
signed.
Do not use the equipment near
inammable liquids or gases. Non-
observance will result in a risk of re
or explosion.
Do not lift or carry the equipment
when the motor is running.
Switch off the equipment and discon-
nect the plug:
- Whenever you leave the machine,
- Before cleaning the ejection hole
or removing blockages,
- When the equipment is out of use,
- Before checking, cleaning or work-
ing on the equipment,
- If the power cable is damaged or
frayed,
- If the equipment has hit a foreign
object or if strange vibrations occur
during work. In this case, check the
equipment for damage and have it
repaired if applicable.
Do not place feet or hands near or
under rotating parts. Do not stand in
front of the grass ejection hole during
sickle mowing.
Maintenance and Storage:
Ensure that all nuts, bolts and screws
are tightened rmly and the equip-
ment is in safe working condition.
Do not attempt to repair the equip-
ment yourself unless you have been
trained to do so. Any work not speci-
ed in these instructions is to be car-
ried out only by customer service
centres that we have authorised.
Keep the equipment in a dry location
and out of reach of children.
Handle the equipment with care. Keep
tools sharp and clean, in order to fa-
cilitate better and safer work. Follow
the maintenance instructions.
Wear protective gloves when chang-
ing the cutting device.
Regularly check the grass collection
device for wear and strains. For safety
reasons, replace worn or damaged
parts. When adjusting the blades, take
particular care to avoid ngers being
trapped between the rotating blades
and xed parts of the machine.
Check that only replacement tools
authorised by the manufacturer are
used.
Electrical Safety:
Ensure that the mains voltage match-
es the specications on the rating
plate.
If possible, connect the equipment only
to a socked with a residual current-
operated protective device (RCD) with
a release current of more than 30 mA.
Avoid bodily contact with earthed
parts (e.g. metal fences, metal posts).
Use only authorised power cables of
type H05VV-F or H05RN-F, which are
no more than 75 m long and suitable
for outdoor use. The power cable wire
cross section must be at least 2.5
mm
2
. Always completely unroll cable
drums before use. Check the cable for
damage.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Florabest FRM 1800 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Florabest FRM 1800 A1 in the language / languages: English as an attachment in your email.

The manual is 4,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Florabest FRM 1800 A1

Florabest FRM 1800 A1 User Manual - German, Dutch, French - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info