630799
22
Zoom out
Zoom in
Previous page
1/34
Next page
22
GB
Assembling the Curved
Handle
B
1. Insert the lower bar (3) into the
slot on the lawnmower housing
(6).
2. Fix the bar (3) using the en-
closed screws (13).
C
3. Screw all four wheels (5) onto
the lawn mower housing (6). All
of the wheels must be set to the
same height.
4. Fix the curved handle (1) using
the enclosed screws (14) and the
wing nuts (2) on the lower bar
(3). There are two possible posi-
tions.
5. Clip the cable holder (8) into the
bar (3) and thus x the cable.
When both wing nuts are loosened,
the curved handle can be folded
down for storing the equipment.
Ensure that the power cable is not
caught.
Assembling the Grass Box
D
1. Connect the two pieces of the
collection box (4).
2. Connect the handle (15) in one
of the two pieces of the collec-
tion box (16).
Do not work with the lawn mower
without impact protection. There is
a risk of injury.
We recommend always using the
grass box when working with the
lawn mower, otherwise the mow-
ing result may be signicantly im-
paired.
Electrical Safety:
Ensure that the mains voltage matches
the specications on the rating plate.
If possible, connect the equipment only
to a socked with a residual current-
operated protective device (RCD) with a
release current of more than 30 mA.
Avoid bodily contact with earthed
parts (e.g. metal fences, metal posts).
Use only authorised power cables of
type H05RN-F, which are no more than
75 m long and suitable for outdoor
use. The power cable wire cross sec-
tion must be at least 2.5 mm
2
. Always
completely unroll cable drums before
use. Check the cable for damage.
To x on the power cable, use the
cable suspension intended for the pur-
pose.
Keep the power cable away from the
cutting tool when working. The cutting
blades may damage the power cable
and result in contact with live parts. Al-
ways run the power cable behind the
operator.
Do not use the power cable to pull the
plug from the socket. Protect the power
cable from heat, oil and sharp edges.
Switch off the equipment and discon-
nect the plug from the socket if the
power cable is damaged. If the power
cable is damaged, it must be replaced
by the manufacturer, the customer serv-
ices of the same, or a qualied person,
in order to avoid hazards.
Do not connect a damaged power
cable to the mains. Do not touch a
damaged power cable when it is
connected to the mains. A damaged
power cable may result in contact with
live parts.
Assembly
Disconnect the plug before any
work on the equipment. There is a
risk of injury.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Florabest FRM 1200 C3 - IAN 43002 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Florabest FRM 1200 C3 - IAN 43002 in the language / languages: English, German as an attachment in your email.

The manual is 1,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info