674510
30
Zoom out
Zoom in
Previous page
1/140
Next page
3 0
G B I E
tion of faults, read the “Trouble-
shooting” chapter or contact our
Service-Centre.
Walk at a steady pace, do not run.
Make sure that the mains volt-
age is compatible with the infor-
mation of the label.
Keep the cable away from the
eld of action and basically
play it out behind the operator.
Do not carry the device by the
cable. Do not use the cable to
pull out the plug from the plug
socket. Protect the cable against
heat, oil and sharp edges.
Damaged cables, coupling and
plugs or connecting leads not
corresponding to specications,
must not be employed. Remove
the plug immediately from the
plug socket in case of damage
to the mains cable. Do not touch
the mains power supply cable
under any circumstances until
you have pulled the plug out of
the mains socket.
Extension cords are to be kept
away from moving, dangerous
parts to prevent damages on
cables that can lead to contact-
ing of active parts.
Maintenance and storage:
Check the operational service-
ability and integrity of the de-
vice regularly in order to avoid
danger to the operator.
Only use the replacement parts
that are supplied and recom-
mended by our Service Centre.
Do not attempt to repair the
appliance yourself unless you
have specic training to do so.
Leave any work not listed in this
manual to our Service Centre.
Keep the device in a dry loca-
tion and out of reach of children.
Handle the unit with care. Clean
the ventilation slits regularly; keep
to the maintenance instructions.
Keep all cooling air inlets clear
of dirt.
If the power cable for this equip-
ment is damaged, it must be
replaced by the manufacturer,
a customer service agent of the
same or a similarly qualied per-
son in order to prevent hazards.
Do not use the appliance if the on/
off switch does not work properly.
Always have a damaged switch
repaired by our Service Centre.
Do not overload your device.
Work only within the indicated
range of performance. Do not
employ any low power ma-
chines for heavy work. Do not
use your device for purposes for
which it has not been designed.
Additional safety instructions:
After they have been joined to-
gether, the blower tubes cannot
be taken apart again!
Switch off the device before
installing or removing the collec-
tion bag.
Recommendation:
Connect the device, as far as
possible, only to a plug socket
with a ground-fault circuit inter-
rupter (g.f.c.i switch), with a rat-
ed residual current at not more
than 30 mA.
30


Need help? Post your question in this forum.

Forumrules
1

Forum

florabest-fls-3000-b3---ian-298484

Reset search

  • Where can I get a switch for a florabest FLS 3000 B3 Submitted on 22-9-2022 at 14:14

    Reply Report abuse
  • Where can I get a replacement switch for a florabest FLS 3000 B3 Submitted on 22-9-2022 at 14:13

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Florabest FLS 3000 B3 - IAN 298484 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Florabest FLS 3000 B3 - IAN 298484 in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.

The manual is 3,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info