674627
13
Zoom out
Zoom in
Previous page
1/92
Next page
13
IEGB
Turning on and off
Before switching on device, make
sure it is not in contact with any ob-
jects. Ensure stable positioning.
K L M N O P Q R S T
U V W X Y Z
A B C D E F G H I J
1. Make a loop from the end of the
extension cable and attach this to
the strain relief (5).
2. Connect the machine to the pow-
er supply.
3. To turn on, push the
on/off switch (4):
- in blow mode: to the right.
- in suction mode: to the left.
4. In order to regulate the suction/
blowing power, press the volume
control (2).
5. To turn off, push the
on/off switch (4):
- in blow mode: to the left.
- in suction mode: to the right.
Working with the leaf
blower
The leaf blower may only be
used for the following pur-
poses:
- As a blower to pile up dry
leaf material or to blow mate-
rial out of places that are hard
to access (e.g. under cars)
- As a suction device to suck
up dry leaf material. The de-
vice also functions as a shred-
der in the suction function. The
dry leaves are shredded and
their volume is reduced, pre-
paring the material for later
composting if desired. The
shredding intensity depends
on the size of the leaf material
and its residual moisture.
Uses other than those de-
scribed here may damage the
machine and put the operator
at risk.
During work, ensure that the device
is not struck against hard objects,
which can cause damage. Do not
suck up any solid bodies such as
stones, branches or pieces of branch,
r cones or similar, since these can
damage the device, in particular the
shredding mechanism. Repairs of
this type are not covered by
the guarantee.
Blowing operating mode:
For safety reasons, make sure
that the protective cover (7) is
mounted on the suction ope-
ning.
You get optimal results when you use
the blower with a separation distance
to the ground of 5 -10 cm.
Begin work with the highest blowing
power, in order to rapidly pile up the
leaves lying around. Select a lower
blowing power to compact the previ-
ously piled up leaves.
Before blowing, loosen leaves adhering
to the ground with a broom or rake.
The guide rollers at the end of the tube
make it easier to work on at surfaces.
Suction operating mode:
For safety reasons, both suc-
tion tube sections and the coll-
ection bag must be correctly
mounted before you can start
the device.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Florabest FLS 3000 B2 - IAN 275664 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Florabest FLS 3000 B2 - IAN 275664 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 2,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info