Manual Florabest FLB 3000 A1 - IAN 109790 (page 16 of 108) (English, Danish, Swedish, Norwegian, Finnish)

674626

Zoom out

Zoom in

1/108

forwards directing the nozzle at the debris

to be cleared.

Alternatively hold nozzle just above the

ground and swing the machine from side

to side, moving forwards and directing the

nozzle at the debris to be cleared. Blow the

debris into a convenient heap then use the

vacuum function to collect the debris.

Vacuum mode

Inspect the area to be worked before start-

ing. Remove any objects or debris that

could be thrown, jammed or become en-

tangled in the Vacuum-Blower.

Select the vacuum function using the se-

lector lever on the side of the machine

and switch on. With the Vacuum-Blower

resting on its wheels move the Vacuum-

Blower forwards directing the nozzle at

the debris to be collected. Alternatively

with the Vacuum-Blower held just above

the ground swing the machine from side

to side, moving forwards and directing the

nozzle at the debris to be collected. Do not

force the nozzle into the debris as this will

block the suction tube and reduce the ef-

ficiency of the machine.

Organic materials such as leaves contain a

large amount of water that can cause them

to stick to the inside of the suction tube. To

reduce sticking the material should be left

for a few days to dry out.

Adjust the front handle (fig. 12-14)

• Press the side adjustment button (12.1)

(fig. 12).

• Now set the handle to the desired posi-

tion (13.1) (fig. 13).

• Release the adjustment button, the front

handle latches into position and is locked

(fig. 14).

Using the leaf rake

Working with the leaf rake (fig. 15)

• Rotate the knob by 90 and slide it down-

wards (15.1)

• To fasten in place rotate the knob by 90°

again (15.2)

• The rake is now fastened in place (15.3)

Working without the leaf rake (fig. 16)

• Rotate the knob by 90° and slide it up-

wards (16.1)

• To fasten in place rotate the knob by 90°

again (16.2)

• The rake is now disabled (16.3)

Cleaning flap (fig. 17-18)

If the device is no longer operating cor-

rectly due to clogging or blockages, open

the cleaning flap as follows:

• Remove mains plug

• Loosen the screw (17.1) by turning coun-

ter-clockwise.

• Open the cleaning flap (18.1) and fold

up the cover (fig. 18).

• Carefully remove residue or blockages

on the impeller.

• Check whether the impeller turns easily

and is in fault-free condition

Important

If the cleaning flap is not closed and

correctly screwed down the device

cannot be operated.

Cleaning and Storage

Make sure that all nuts, bolts and screws

are tight and that the guards are fitted

correctly.

All damaged and worn parts should be

replaced in order to maintain the Vacuum-

Blower in a safe working condition.

Never leave material in the Vacuum-Blow-

er or the debris collection bag. This could

be dangerous when starting the Vacuum-

Blower.

After use the Vacuum-Blower should be

thoroughly cleaned.

Ensure that the Vacuum-Blower is switched

off and disconnected from the mains sup-

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Florabest FLB 3000 A1 - IAN 109790 in the language / languages: English, Danish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 2,42 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Florabest FLB 3000 A1 - IAN 109790 Manual

Product: