Manual Florabest FLB 3000 A1 - IAN 109790 (page 12 of 108) (English, Danish, Swedish, Norwegian, Finnish)

674626

Zoom out

Zoom in

1/108

use an extension cable or cable drum

with a three-core cable whose earth

wire is connected.

- If the power tool is to be used outdoors,

use only extension cables that are in-

tended for outdoor use and which are

labelled as such.

- Always unroll extension cables com-

pletely.

- Extension cables must have a conductor

cross section of at least 1.5 mm

- Damaged extension cables must not be

used but rather must be replaced.

- Protect your extension cable from sharp

edged objects or from excessive heat

and moisture or wet locations.

• Stay alert

Proceed cautiously, use your common

sense and do not operate the power tool

if you are tired, if you are taking medi-

cation that makes you drowsy or if you

have consumed alcohol or drugs.

• Checking of damaged parts

- The power tool should be carefully

checked before use to ensure that it is

working properly and fulfilling its in-

tended purpose.

- Check that the moving parts are cor-

rectly aligned and ensure that they are

able to move freely. Check the tools for

damaged or missing parts and if neces-

sary have these replaced or repaired at

an authorised customer support centre.

If the power tool has to be mounted

then ensure that it is safely secured on

a suitable workbench. Check all other

conditions that could have an influence

on the operation of the power tool.

- If protective coverings or other parts of

the power tool are damaged then these

should be replaced or repaired in an

authorised customer support centre in-

sofar as these operating instructions do

not specify otherwise.

Careful handling of tools

• Keep cutting tools sharp and clean. This

will provide you with better results and

increased safety. Replace the damaged

parts at an authorised service centre

before using the machine.

• Follow the instructions for lubrication

and for replacing accessory parts.

• Check the mains cable for the tool regu-

larly. If it should be damaged then have

this replaced by an approved customer

support centre.

• Check the extension cable regularly and

replace it if it is damaged.

• Keep grips dry, clean and free of oil and

grease.

• Take care to ensure that the ventilation

slots are always clear and free of dust.

Blocked ventilation slots can lead to

overheating and can damage the motor.

• Disconnect the power tool from the

mains

Ensure that the power tool is discon-

nected from the mains when not in use,

before it is serviced or lubricated, be-

fore adjustments are carried out on it,

or when accessory parts such as blades,

drill bits and cutters are replaced.

• Removal of adjustment wrenches

Make it a consistent practice to always

check that there are no adjustment

wrenches remaining on the power tool

before you switch it on.

• Avoidance of unintended switching on

Ensure that the switch is in the OFF posi-

tion before you connect the power tool

to the mains.

• Extension cables and cable drums

- The device should be operated via a re-

sidual current circuit breaker (RCD) with

a triggering current of max. 30 mA.

- DO NOT USE cable drums or extension

cables with a two-core cable to operate

a power tool with an earth wire. Always

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Florabest FLB 3000 A1 - IAN 109790 in the language / languages: English, Danish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 2,42 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Florabest FLB 3000 A1 - IAN 109790 Manual

Product: