Manual Florabest FKS 2200 D2 - IAN 93562 (page 69 of 80) (English, German, Dutch)

576525

Zoom out

Zoom in

1/80

7. After the sharpening, all cutting

elements must now be equal in

length and width.

8. After every third sharpening, the

sharpness depth (depth limitation)

must be checked and the height

led with the aid of a at le. The

depth limitation should be set back

about 0.65 mm from the cutting

tooth. After the setting back of

depth limitation, round it off a lit-

tle at the front.

Adjusting the chain tension

The adjustment of the chain tension is de-

scribed in the chapter: Starting operation,

tensioning chainsaw.

• Switch off the saw and pull out the

power plug.

• Check the chain tension regularly and

re-adjust this as often as possible.When

the saw chain is tensioned with 9 N

(approx. 1 kg), the gap between the

saw chain and the guide rail may not

be more than 2 mm.

Starting up a new saw chain

In the case of a new chain, the tensioning

force decreases after some time. Therefore

you must re-tension the chain after the rst

5 cuts and at longer intervals after this.

Never attach a new chain

to a worn drive pinion or

place onto a damaged or

worn chain bar. The chain

could spring back or break,

potentially leading to serious

injury.

Maintaining the chain bar

Use cut-protection gloves

when handling the chain or

the chain bar.

The chain bar must be turned round every

10 working hours, in order to guarantee

uniform wear.

1. Switch off the saw and pull out the

power plug (18).

2. Remove the sprocket chain wheel cov-

ering (15), the saw chain (5) and the

chain bar (4).

3. Check the chain bar (4) for wear. Re-

move burrs and straighten the guide

surfaces with a at le.

4. Clean the oil passages (

25) of

the chain bar, in order to guarantee

a trouble-free, automatic oiling of the

saw chain during operation.

5. Mount chain bar (4), chainsaw (5) and

sprocket chain wheel covering (15)

and tighten the chainsaw.

Turning over the bar (4) requires you to

move the tensioning screw (

22) to the

other side of the bar. Unscrew the retain-

ing bolt attaching the bar to the tensioning

screw. Move the tensioning screw over to

the other side of the bar and screw the re-

taining bolt back in.

With the oil nozzles in good condi-

tion and the oil regulator set cor-

rectly, the saw chain will spray a

little oil off after starting.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Florabest FKS 2200 D2 - IAN 93562 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 2,17 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Florabest FKS 2200 D2 - IAN 93562 Manual

Product: