Manual Florabest FKS 2200 D2 - IAN 93562 (page 62 of 80) (English, German, Dutch)

576525

Zoom out

Zoom in

1/80

4. Hold the electric chainsaw rmly

with both hands, with the right

hand on the rear handle (

and the left hand on the front

handle (8). Thumb and nger

must close securely over the han-

dles.

5. Turn on the electric chainsaw.

6. Activate the chain braking lever

(3), with running motor, with

the left hand. Chain should stop

abruptly.

7. Once the chain brake is work-

ing properly, release the on/off

switch (10) and the chain brake.

If the chain brake does not

function correctly, you must

not use the electric chainsaw.

A slack saw chain leads to

danger of injury.

Return the electric chainsaw

to our Service-Center for re-

pair.

Checking the chain

lubrication

Check the oil level and the chain lubrica-

tion system before commencement of work.

• Switch on the chainsaw and hold it

above a bright background. The saw

must not touch the ground.

If an oil trace can be seen, the chainsaw is

working trouble-free.

If no oil trace can be seen clean the

oil passages or turn the chainsaw

to our Service-Center for repair.

4. Clean the oil passages of the

chain bar (25), in order to guar-

antee a trouble-free, automatic

oiling of the saw chain during

operation.

Changing the saw bar

1. Switch the saw off and unplug it

from the mains.

2. Lay the saw on a at surface.

3. Turn the fastening bolt (14) anti-

clockwise and loose the chain

adjustment ring (

13) to remove

the sprocket chain wheel cover-

ing (15).

4. Remove the saw bar (4) and saw

chain (

5). To remove the guide

bar (4), raise it to an angle of ap-

prox. 45 degrees. This will make

it easier to take the saw chain (5)

off the sprocket

(

23).

5. To t the new bar, place the bar

(4) onto the bar bolt (21) with

the tensioning plate pointing out-

wards (22).

Fitting the saw chain

1. Switch the saw off and unplug it

from the mains.

2. Spread the chain (5) out into a

loop with the cutting edges run-

ning clockwise .

3. Slide the saw chain (5) into the

bar guide groove. To mount the

guide bar (4), raise it to an angle

of approx. 45 degrees. This will

make it easier to replace the saw

chain (5) onto the sprocket (23).

It is normal that the saw chain (5)

is slack. Sagging in the chain is

normal.

4. Pre-tighten the chain (5) by turn-

ing the tensioning plate (22)

clockwise.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Florabest FKS 2200 D2 - IAN 93562 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 2,17 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Florabest FKS 2200 D2 - IAN 93562 Manual

Product: