Manual Florabest FKS 2200 D2 - IAN 87800 (page 67 of 76) (English, German, Dutch)

576528

Zoom out

Zoom in

1/76

tion. The vertical separation distance

between these two determines the

sharpness depth.

• The following values must be noted in

sharpening the cutting teeth:

- Sharp edge angle (30°)

- Breast angle (85°)

- Sharpness depth (0.65 mm)

- Round le diameter (4.0 mm)

Deviations from the meas-

urement data of the cutting

geometry can lead to an

increase of the spring-back

slope of the machine. In-

creased danger of accident!

Special tools are necessary for sharpening

the chain, which guarantee that the cutting

edges are sharpened at the correct angle

and to the correct depth. For the inexperi-

enced user of chainsaws, we recommend

to have the saw chain sharpened by a

specialist or a specialist workshop. If you

think yourself capable of sharpening the

chain, you can acquire the special tools in

the specialist trade.

1. Switch the saw off and unplug it

from the mains.

2. Remove the saw chain (refer

to the section on operating the

saw). The chain should be well-

tensioned to ensure proper sharp-

ening.

3. For the sharpening, a round le

with 4.0mm diameter is neces-

sary.

Other diameters damage the

chain and can lead to danger

during work!

4. Sharpen only from the inside to

the outside. Guide the le from

the inner side of the cutting teeth

to the outer side. Lift the le when

you are withdrawing it.

5. Sharpen rst the teeth on one

side. Turn the saw around and

sharpen the teeth of the other

side.

6. The chain is worn and must be

replaced by a new saw chain if

only approx. 4 mm of the cutting

teeth is remaining.

7. After the sharpening, all cutting

elements must now be equal in

length and width.

8. After every third sharpening, the

sharpness depth (depth limitation)

must be checked and the height

led with the aid of a at le. The

depth limitation should be set back

about 0.65 mm from the cutting

tooth. After the setting back of

depth limitation, round it off a lit-

tle at the front.

Adjusting the chain tension

The adjustment of the chain tension is de-

scribed in the chapter: Starting operation,

tensioning chainsaw.

• Switch off the saw and pull out the

power plug.

• Check the chain tension regularly and

re-adjust this as often as possible.When

the saw chain is tensioned with 9 N

(approx. 1 kg), the gap between the

saw chain and the guide rail may not

be more than 2 mm.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Florabest FKS 2200 D2 - IAN 87800 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 2,12 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Florabest FKS 2200 D2 - IAN 87800 Manual

Product: