576524
69
Zoom out
Zoom in
Previous page
1/80
Next page
69
GB







Maintaining the chain bar



Thechainbarmustbeturnedroundevery
10workinghours,inordertoguarantee
uniformwear.
1. Switchoffthesawandpulloutthe
powerplug(18).
2. Removethesprocketchainwheelcov-
ering(15),thesawchain(5)andthe
chainbar(4).
3. Checkthechainbar(4)forwear.Re-
moveburrsandstraightentheguide
surfaceswithaatle.
4. Cleantheoilpassages(
J
25)of
thechainbar,inordertoguarantee
atrouble-free,automaticoilingofthe
sawchainduringoperation.
5. Mountchainbar(4),chainsaw(5)and
sprocketchainwheelcovering(15)
andtightenthechainsaw.
Turningoverthebar(4)requiresyouto
movethetensioningscrew(
F
22)tothe
othersideofthebar.Unscrewtheretain-
ingboltattachingthebartothetensioning
screw.Movethetensioningscrewoverto
theothersideofthebarandscrewthere-
tainingboltbackin.
Withtheoilnozzlesingoodcondi-
tionandtheoilregulatorsetcor-
rectly,thesawchainwillspraya
littleoiloffafterstarting.
Waste disposal
and environmental
protection
Donotdisposeofusedoilinthesewage
systemordrains.Disposeofusedoilinan
environmentallycorrectmanner-bringitto
awastedisposalcenter.
Beenvironmentallyfriendly.Returnthe
tool,accessoriesandpackagingtoarecy-
clingcentrewhenyouhavenishedwith
them.
Machinesdonotbelongwithdo-
mesticwaste.
Emptytheoiltankcarefullyandhandin
yourelectricchainsawatadisposalcenter.
Theplasticandmetalpartsemployedcan
beseparatedoutandthusrecycleduse
canbeimplemented.AskourService-
Centerfordetails.
Spare parts
Thefollowingsparesareavailablefrom
Service-Center.Pleaseindicatethemachine
typeandthenumberofthesparepartwith
yourorder.
Sawchain............................30091570
Chainbar............................30100412
Biochainoil1liter................30230001
Biochainoil5liter................30230002
Iffurthersparepartsshouldbenecessary,
pleasendthepartnumberontheexplod-
eddrawings.
69


Need help? Post your question in this forum.

Forumrules
1

Forum

florabest-fks-2200-c2---ian-79271

Reset search

  • Tension adjuster for chain dosnt work. Need to pull out the chain bar to put tension on. Tension is then only maintained by tightning the adjuster very tightly. Could it be that screw number 81 is too short and not long enough to fit into the chain adjuster. Submitted on 21-7-2020 at 10:12

    Reply Report abuse
    • Zelfde probleem hier
      Kan de ketting niet aanspannen
      Waar kan ik een schroef bestellen die wel past Answered on 3-4-2023 at 16:07

      Vote up Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Florabest FKS 2200 C2 - IAN 79271 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Florabest FKS 2200 C2 - IAN 79271 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 2,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info