Manual Florabest FHT 600 D3 - IAN 109770 (page 11 of 86) (English, German, Dutch, French, Swedish, Finnish)

635939

Zoom out

Zoom in

1/86

GB IE

Cutting Techniques

• Cut thick branches beforehand using a

branch clippers.

• The double-sided cutter bar enables

cutting in both directions or, with a

swinging action, from one side to the

other.

• In case of vertical cutting, move the

hedge trimmer uniformly forward or up

and down in an arc movement.

• In case of horizontal cutting, move

the hedge trimmer in a sickle-shaped

movement to the edge of the hedge, so

that cut branches fall to the ground.

• In order to achieve long straight lines,

the placing of tensioned guiding cords

is recommended.

Cutting Shaped Hedges:

It is recommended that hedges be cut in

a trapezoidal shape, in order to prevent

stripping off of the lower branches. This

corresponds to the natural plant growth

and allows the hedge to thrive optimally.

During cutting, only the new annual

growths are reduced and thus a dense

branching and a good screen will develop.

1. Cut the sides of a hedge rst.

To do this, move the hedge trim-

mer in the direction of growth

from bottom to top. If you cut

down from the top, the thinner

branches will move out, which

may result in some areas having

sparse growth or holes.

2. Cut the top edge, according to

taste, in a at shape, roof shape

or rounded shape

3. Trim young plants to the required

shape. The main growth should

remain undamaged until the

hedge has reached the planned

height. All other shoots are lopped

off to half size.

Care of Free-Growing Hedges:

Free-growing hedges are not shaped when cut,

although they must be regularly maintained so

the hedge does not become too high.

Maintenance/Cleaning

Repair and servicing work not de-

scribed in this manual should always

be carried by our Service Centre.

Use only original parts. This will pre-

vent damage to the equipment and

any resulting personal injury.

Pull out the power plug before carry-

ing out any work on the equipment.

There is a risk of electrocution or of

injury from moving parts.

Wear gloves while handling the

blades. Risk of cuts.

Do not use any cleaning agents

or solvents. These could cause ir-

reparable damage to the equipment.

Chemical substances can attack the

plastic parts of the equipment.

Carry out the following maintenance and

cleaning work regularly. This will guarantee

a long and reliable service life.

• Before each use, check the hedge trimmer

for obvious defects such as loose, worn or

damaged parts. Check the secure seating

of the bolts in the cutter bar (

2).

• Do not use the unit if the blades are

blunt or worn. This will overstress the

motor and gearbox of the machine.

• Check coverings and safety devices

(

1,3) for damage and correct seat-

ing. Replace these where necessary.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Florabest FHT 600 D3 - IAN 109770 in the language / languages: English, German, Dutch, French, Swedish, Finnish as an attachment in your email.

The manual is 1,1 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Florabest FHT 600 D3 - IAN 109770 Manual

Product: