733450
14
Zoom out
Zoom in
Previous page
1/92
Next page
14
GB IE
Putting down the device
Place the device on the ground with the
motor housing rst.
The safety cutter bar (1) must be placed
on the ground without being subjected
to any pressure.
Do not apply any static pressure
whatsoever to the safety cutter bar (1).
Swivelling the Arm
Caution!
The gear box (
A
2) becomes
hot during operation. There is
a risk of burns. Do not touch
the gearbox housing (
A
2) or
the connection to the front arm
(
A
8).
E
1. Release the indexing by pushing
the safety slide (12) forward.
2. The tubular shank can now op-
tionally be turned 45° / 90° to
the right or the left (see the scale
on the device).
Cutting Techniques
Cut thick branches beforehand using a
branch clippers.
The double-sided cutter bar enables cut-
ting in both directions or, with a swing-
ing action, from one side to the other.
In case of vertical cutting, move the
hedge trimmer uniformly forward or up
and down in an arc movement.
In case of horizontal cutting, move the
hedge trimmer in a sickle-shaped move-
ment to the edge of the hedge, so that
cut branches fall to the ground.
In order to achieve long straight
lines, the placing of tensioned guid-
ing cords is recommended.
Cutting Shaped Hedges:
It is recommended that hedges be cut in
a trapezoidal shape, in order to prevent
stripping off of the lower branches. This
corresponds to the natural plant growth and
allows the hedge to thrive optimally. During
cutting, only the new annual growths are
reduced and thus a dense branching and a
good screen will develop.
1. Cut the sides of a hedge rst. To
do this, move the hedge trimmer
in the direction of growth from
bottom to top. If you cut down
from the top, the thinner branches
will move out, which may result in
some areas having sparse growth
or holes.
2. Cut the top edge, according to
taste, in a at shape, roof shape
or rounded shape
3. Trim young plants to the required
shape. The main growth should re-
main undamaged until the hedge
has reached the planned height.
All other shoots are lopped off to
half size.
Care of Free-Growing Hedges:
Free-growing hedges are not shaped when
cut, although they must be regularly main-
tained so the hedge does not become too
high.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Florabest FHL 900 D4 - IAN 275656 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Florabest FHL 900 D4 - IAN 275656 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 2,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info