733450
11
Zoom out
Zoom in
Previous page
1/92
Next page
11
IEGB
Keep cutting tools sharp and
clean. Properly maintained cutting
tools with sharp cutting edges are less
Iikely to bind and are easier to control.
Use the power tool, accessories
and tool bits etc. in accordance
with these instructions, taking
into account the working condi-
tions and the work to be per-
formed. Use of the power tool for op-
erations different from those intended
could result in a hazardous situation. •
Carefully inspect the area to be cut
and remove all wires or other foreign
bodies.
Prior to every use, check the appliance
for obvious defects such as loose, worn
or damaged parts.
Service
Have your power tool serviced
by a qualied repair person us-
ing only identical replacement
parts. This will ensure that the safety
of the power tool is maintained.
Hedge trimmer safety
warnings
Keep all parts of the body away from
the cutter blade. Do not remove cut
material or hold material to be cut
when blades are moving. Make sure
the switch is off when clearing jammed
material. A moment of inattention
while operating the hedge trimmer
may result in serious personal injury.
Carry the hedge trimmer by the handle
with the cutter blade stopped. When
transporting or storing the hedge trim-
mer always t the cutting device cover.
Proper handling of the hedge trimmer
will reduce possible personal injury from
the cutter blades.
Keep cable away from cutting area.
During operation the cable may be
hidden in shrubs and can be acci-
dentally cut by the blade. If dropped,
check the equipment for signicant
damage or defects.
Assembling the
Long-Handled Hedge
Trimmer
Pull out the power plug before car-
rying out any work on the equip-
ment.
Use only original parts.
1. Unpack the device and check it
for completeness.
B
2. Remove the covering cap (21)
from the front extension arm (8).
Push the front extension arm of
the long-handled hedge trimmer
on to the tubular shaft of the
long-handled hedge trimmer
with a slight twisting motion. The
safety button (9) locks into place.
Fix the two tubular elements in
place with the rotary knob (10).
To do this, unscrew the nut of
the threaded rod of the rotary
knob (10) and insert it sideways
into the retainer of the tubular
shaft. Insert the threaded rod of
the rotary knob (10) through the
tubular shaft and screw on the
rotary knob (10) with the nut.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Florabest FHL 900 D4 - IAN 275656 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Florabest FHL 900 D4 - IAN 275656 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 2,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info