733441
14
Zoom out
Zoom in
Previous page
1/74
Next page
FHEHS 900 B2
10GB
IE
NI
Sawing off larger branches
When sawing larger branches (Ø 8–25 cm), first make a relief cut
A
(see figure).
A relief cut also prevents peeling of the bark on the main trunk.
Saw from the top
B
to the bottom
A
.
2
1
Saw in sections
Long or thick branches should be shortened before making the final cut
(see figure).
cb a
Working safely
Keep the appliance, the cutting mechanism and the blade guard in
good condition to prevent injury.
If the appliance has been dropped, check for significant damage or
defects.
Maintain the specified angle 60°±10° to ensure safe operation (see
figure).
Do not use the appliance while standing on a ladder or with unsteady
footing.
Do not be tempted into making a poorly considered cut. You could
endanger yourself and others.
Children should be supervised to ensure that they do not play with the
appliance.
Change your working position regularly. Using the appliance for a long
time can lead to vibration-related circulation disorders of the hands.
You can extend the usage duration by using appropriate gloves or by
taking regular breaks. Note that any personal predisposition to poor
blood circulation, low external temperatures or large gripping forces
can reduce the usage period.
You can reduce the vibration risk, for example, the risk of Raynaud’s
phenomenon, by taking regular breaks during which you rub your
hands together.
Transport
Use the protective cases
for transporting the appliance.
Ensure that the appliance cannot switch on during transport (see
figure).
Maintenance and cleaning
WARNING! If the mains cable needs to be replaced,
this must be carried out by the manufacturer or an
authorised representative in order to avoid safety
hazards.
The motor unit must always be kept clean, dry and free from oil or
grease.
The pole pruner must be cleaned of sawdust at regular intervals.
Use a soft, dry cloth to clean the housing.
Remove the sprocket cover
.
Remove the saw chain
from the blade and clean the guide
rail
.
Keep the saw chain
sharp and check the tension; check the oil level
and the oil supply.
Check the hedge trimmer for loose screws on the cutter bar
and
tighten these if necessary.
Remove stuck cuttings.
Maintain the cutter bar
using an oil spray or an oil can.
Storage
Always clean the appliance thoroughly before storing.
Store the appliance in the supplied protective cases in a dry
place and out of the reach of children.
Store the appliance horizontally or secured against falling.
Empty the oil tank
. Organic chain oil can resinify or leak through
the vent hole in the oil filler cap
.
A
B
C A B
max. 60°±10°
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Florabest FHEHS 900 B2 - IAN 280236 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Florabest FHEHS 900 B2 - IAN 280236 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 1,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info