634222
11
Zoom out
Zoom in
Previous page
1/20
Next page
11
GB IE CY
1. Turn blade xing screw 4 anticlockwise to
slightly loosen blade 2.
2. Set the tension of saw chain 1 using chain
tensioning device 5.
Turn this quick tensioning device clockwise
to increase the tension.
In the same way, the tension of saw chain
1 can be decreased by turning anticlock-
wise.
3. Turn blade xing screw 4 clockwise to
retighten blade 2.
Where saw chain 1 has been newly ten-
sioned, readjust the chain tension after a
short period in operation.
Check the chain tension before each
use of the high pruning saw.
Chain lubrication
Blade 2 and saw chain 1 must always
be oiled. Non-observance of this will
result in increased wear on the blade
and saw chain.
The high pruning saw is equipped with an oil
automatic system. As soon as the motor is
speeded up, the oil also ows faster to the
chain bar 2.
A full tank will last for approx. 10
minutes of continuous opera
tion.
Check the oil level in good time.
Check the oil ll level and regularly top
up with oil. The oil tank holds 70 ml oil.
G
Use Grizzly bio-oil; this product contains
additives that reduce wear and tear and
does not damage the pump system. bio-oil
is available from our Service-Center (see
P. 19 for the address).
If you have no Grizzly bio-oil available, use
chain lubrication oil with low adhesive addi-
tive content.
1. Unscrew the oil ll cap (23) and ll
up with chain oil.
2. Wipe off any spilled oil and close the
cap again.
Note that the saw can re-oil.
Operation startup
Observe the country-specic and municipal
regulations.
Do not work with the high pruning saw during
general ordinary or prescribed quiet periods.
1. Before starting, check:
- The tension of saw chain 1
- The oil level
- All nuts and screws are sitting rmly
- Only remove blade cover 24 at the last
minute
- Set the working length of the telescopic
arm before switching on the equipment
- Check that shoulder strap 12 is in a com-
fortable position that eases your hold on
the high pruning saw
- Ensure that you are wearing protective
clothing
- Check that you are standing safely
- Check your working surroundings
2. Switching on
- Connect the equipment to a power supply
with the supply voltage specied on the
rating plate.
- Hold the equipment rmly in a relaxed and
safe manner. Operate starting lock 11 and
10 min
F
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Florabest FHE 550 - IAN 38028 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Florabest FHE 550 - IAN 38028 in the language / languages: English as an attachment in your email.

The manual is 1,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Florabest FHE 550 - IAN 38028

Florabest FHE 550 - IAN 38028 User Manual - German, Dutch, French - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info