539572
57
Zoom out
Zoom in
Previous page
1/70
Next page
GB
- 59 -
- If petrol has overflowed, do not under any
circumstances attempt to start the engine.
Instead, remove the equipment from the af-
fected area. Avoid starting the engine until the
petrol fumes have completely evaporated.
- For safety reasons, the petrol tank and the
tank cap must be replaced if they are dama-
ged.
Replace defective silencers.
Before using the scythe, visually inspect it to
ensure that the blade, mounting bolts and the
entire cutting apparatus are in good working
order (i.e. not worn out or damaged). To
prevent any imbalance, replace worn out or
damaged blades and mounting bolts as a set
only (if applicable).
Handling
(operation, storage, monitoring)
Wear close-fitting work clothing which is in
good condition and which offers protection,
such as long trousers, sturdy work shoes,
hard-wearing gloves, a helmet, a face mask
or goggles to protect your eyes, and good
quality cotton wool in your ears or some other
ear protectors to reduce the noise.
Store the equipment in a safe place. Open the
petrol tank cap slowly to release any pressure
that may have formed in the petrol tank. To
prevent the risk of fire, move at least 3 meters
from the refueling area before you start the
equipment.
Switch off the equipment before you put it
down.
Always hold the equipment firmly in both
hands. Your fingers and thumbs should be
wrapped around the handles.
Ensure that all screws and connecting ele-
ments are secure. Never use the equipment if
it has not been properly adjusted or has not
been fully or safely assembled.
Make sure that the handles are clean and dry
and that there is no petrol mixture on them.
Set the line spool to the required height. Avoid
touching small objects such as stones with the
line spool.
When carrying out mowing work on a slope
always stand at a lower level than the cutting
tool. Never cut or trim on a smooth, slippery
hill or slope.
Keep all parts of your body and items of
clothing away from the line spool when you
start the engine and when the engine is run-
ning. Before you start the engine ensure that
the line spool will not strike an obstacle.
Always switch off the engine before working
on the cutting tool.
Store the equipment and accessories in a safe
place protected from naked flames and heat/
spark sources such as gas geyser heaters,
tumble driers, oil stoves or portable radiators,
etc.
Keep the guard hood, line spool and engine
clear of mowing debris at all times.
Only adequately trained people and adults
may use, adjust and maintain the equipment.
If you are not familiar with the equipment,
practice handling it with the engine off.
Always check the site you want to mow be-
fore you begin your work. Solid objects such
as pieces of metal, bottles, stones, etc. can be
catapulted away and cause serious injuries
and permanent damage to the equipment. If
you touch a solid object with the equipment
by mistake, switch off the engine immediately
and check the equipment for signs of dama-
ge. Never use the equipment if it is damaged
or defective.
Always operate the equipment in its high
speed range for trimming and cutting. Do not
let the engine run at low speed at the start of
mowing or during trimming work.
Only use the equipment for the purpose for
which it is intended, such as trimming and
mowing weeds.
Never hold the line spool above knee height
when the equipment is in operation.
Do not use the equipment if other people or
animals are in the immediate vicinity. Keep a
minimum distance of 15 m between yourself
and other people or animals when mowing.
Keep a distance of 30 m if you are mowing
down to the ground.
Anleitung_3401991_LB2.indb 59Anleitung_3401991_LB2.indb 59 24.02.12 14:0924.02.12 14:09
57


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Florabest FBS 43 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Florabest FBS 43 A1 in the language / languages: German, Dutch, French as an attachment in your email.

The manual is 3,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info