Manual Florabest FBK 4 A1 - IAN 110011 (page 14 of 78) (English, German, Dutch, French)

733447

Zoom out

Zoom in

1/78

FBK 4 A1

Safety equipment

The relevant plastic protective guard for the cutting blade or ﬁlament

operation must be installed when working with the appliance in order to

prevent objects from being ﬂung away.

WARNING!

■ Never mow/trim while other individuals, especially children or animals,

are in the vicinity.

■ Maintain a safety distance of 15 m. Turn oﬀ the appliance immedi-

ately if this distance is not maintained.

CAUTION! RISK OF POISONING!

■ Exhaust gases, fuels and lubricants are toxic. Exhaust gases must

never be inhaled.

WARNING!

■ Petrol is highly ﬂammable. Store petrol only in the containers

provided.

■ Refuel only outdoors and do not smoke.

■ The ﬁller cap must not be opened and refuelling must not take place

while the engine is running or when the appliance is hot.

■ Do not attempt to start the engine if the petrol has overﬂowed. In-

stead, remove the appliance from the area polluted by petrol. Do not

attempt to restart the appliance until the petrol fumes have dissipated.

■ For safety reasons, the petrol tank and ﬁller cap must be replaced if

they are damaged.

Limit the noise development and vibrations to a minimum!

■ Only use appliances that are in good condition.

■ Maintain and clean the appliance on a regular basis.

■ Adapt your working method to the appliance.

■ Do not overload the appliance.

■ Have the appliance inspected if necessary.

■ Switch the appliance oﬀ when not in use.

■ Wear protective gloves!

Before use

CAUTION!

■ Always wear non-slip footwear and appropriate safety clothing

such as protective gloves, a hard hat, a protective mask and safety

goggles as well as hearing protection.

■ Check the area in which the appliance is to be used and remove any

objects that may be caught and slung away.

■ Before use and after dropping or other impacts, always visually in-

spect the appliance to check whether the cutting tool, mounting bolts

and the entire cutting unit are damaged. Worn or damaged cutting

tools and mounting bolts must be replaced.

■ Always carry out a visual inspection before use to check whether the

cutting tools are worn or damaged. To prevent imbalance, worn or

damaged cutting tools and mounting bolts should be replaced only

as complete sets.

Attaching the round handle

♦ Start by ﬁtting the rubber ring

on the boom .

♦ Attach the barrier bar

onto the rubber ring

from below.

♦ The pin

on the barrier bar must be pushed into one of the two

holes on the boom

to lock it into place.

♦ Push the round handle

onto the rubber ring

provided on the

boom .

♦ Insert the 4 mounting bolts

from above through the round handle

and secure them with the 4 nuts in the barrier bar

♦ Tighten the bolts

Fitting the quick release mechanism

♦ Hook in the carabiner and secure it with the red strap on the quick

release mechanism (see ﬁgures). Pull on the red strap if you have to

release the appliance quickly.

Fixing/attaching the carrying harness

♦ Hook the carrying harness

into the carrying lug .

♦ Adjust the length of the carrying harness

to your size so that the

carrying lug

is at hip height when hooked in place.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Florabest FBK 4 A1 - IAN 110011 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,72 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Florabest FBK 4 A1 - IAN 110011 Manual

Product: